Toa P-906MK2 Operating Instructions Manual
Text of the manual
TOA 900 SERIES II
POWER AMPLIFIER
Operating Instructions
P-906MK2
P-912MK2
P-924MK2
P-906MK2
P-912MK2
P-924MK2
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE
LIGHTNING
FLASH
WITH
ARROWHEAD WITHIN A TRIANGLE IS
INTENDED TO TELL THE USER THAT
PARTS INSIDE THE PR
The TOA P-906MK2, P-912MK2 and P-924MK2 Power Amplifiers deliver u
Applies line power. Two-position push button
switch for on/off modes.
Power Indicator LED
Green LED lights when the power is switched
"ON".
Signal Indicator LED
Green LED lights when more than -30 dB signal
level is fed to the inputs by means of the master
volume control.
Normal Indicator LED
AC Power Cord
Connects to power source.
AC Outlet (Unswitched)
Provides AC power for auxiliary equipment with
power consumption of up to 500W.
Impedance Select Switch
Selects the desired impedance.
Enables unbalanced output of low impedance
when this switch is set to "DIRECT".
Output terminals
Connect to speakers.
Modul
Two types of input terminals are provided on the rear for input connections.
(1) 2P terminal (marked HOT, COM)
It is provided for direct input (unbalanced, 10k ohms) without using plug-in module. This terminal is
directly connected with a potentiometer inside.
(2) Plug-in module input
Select the desired module according to application.
DIRE
