Samsung SVMi-4 Technical Manual And User Manual

I Hardware Description G SVMi-4 Main System - Serial Port - Memory Connector - Reset Button - Back Plane Connectors - Memory Access LED - Run Status LED - Port Status LED - Memory Contents - Page 2 * If you are installing an SVM-400 system, refer to the SVM-400 Install- ation Manual supplied on your CD. ...

block and Mailbox block for additional information. Entering a New Subscriber To enter a new subscriber, highlight a blank line and press ENTER. Type in the subscriber name, Extension and Mailbox numbers. SVM automatically creates the Extension and Mailbox for the subscriber to use and fills in the EClass and MClass data. SYSTEM WIDE PARAMETERS To access the System Wide Parameters from the System Main Menu, select SYS- TEM WIDE PARAMETERS and press ENTER. The System Wide Parameters include the software release, versi ...

Display shows O.SLI SLOT O.2SLI → →O.2SLI 2. Press UP or DOWN key to select slot number EXP.1 SLOT 6DLI → →8DLI 3. Press RIGHT soft key to change previous card type EXP.1 SLOT 8DLI → →8DLI 4. Press TRSF to store and exit OR Press SPEAKER to store and advance to next MMC DEFAULT DATA: NONE RELATED ITEMS: MMC 724 DIAL NUMBERING PLAN Samsung Programming Programming SVMi-4 & SVM-400 Manual MMCs ...

DESCRIPTION: Specific stations can be assigned to automatically record conversations. Options for recording are: Station number (STN) Mailbox (MB) Voice Mail port Call type: all incoming calls (I), all outgoing calls (O), or both incoming and outgoing calls (B). A maximum of eight stations can be assigned at any one time. PROGRAM KEYS UP & DOWN Used to scroll through options KEYPAD Used to enter selections SOFT KEYS Move cursor left and right SPK Used to store data and advance to next MMC HOLD Used to clear previous entry ...

Controls the grace period between programming actions while in a programming session. The timer automatically returns the sys- tem to secure programming status. LCR ADVANCE TIME Controls the length of time before selecting the next allowable route when a station is allowed to route advance. LCR INTER DIGIT Controls the grace period between dialling valid digits before drop- ping the call and returning the user back to error tone. MCL DELAY Controls the time when the system should start transmitting Au- thorisation Code after sending MCL access code (Cable & Wire- less ...

ing calls (OUT option) or both (IN/OUT option). It can also be used to reset the current MOH port (set in MMC 756) to one of the above options. NOTE: This MMC must be set to support outgoing calls if off-premises notification (beeper, outbound follow me, etc.) is used. PROGRAM KEYS KEYPAD Used to enter new value SPK Used to store data and advance to next MMC HOLD Used to delete an entry UP & DOWN Used to select options ACTION DISPLAY 1. Press TRSF 757 Display shows VM IN / OUT ...

When you have messages in your mailbox, you may be alerted at your cellphone, home phone or any other phone. External Pager Notification When you have messages in your mailbox you may be notified via your pager. The display on your pager will show your mail- box number. Individual Mailbox Greeting Each mailbox has its own associated individual greeting recorded in the mailbox owner's voice. This may be changed as fre- quently as you desire. Individual Mailbox Name Each mailbox has its own associated individual name recorded in the mailbox owner’s voice. Individua ...

nothing.” To use a different, or custom, prompt highlight the field to be changed and enter the desired prompt number. To review or edit the prompt text, press Ctrl+O (O is for Open). Press F1 to bring up the help screens and page down to page 2 for instructions on how to edit text boxes. Invalid Condition Pmt The prompt spoken when no match is found during a MENU search. It normally advises the caller that their entry is invalid (try again). Press Ctrl+O ( O is for Open). To review the prompt text, number, recor ...