Larson Electronics WAL-LED-HL-X2 Operation & User’s Manual

Text of the manual

Larson Electronics LLC www.LarsonElectronics.com [email protected]

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364 WAL-LED-HL-X2 Thank you for purchasing the WAL-LED-HL-X2 intrinsically safe dual lamp headlamp. Save these instructions. Please read these instructions before using your EXP-LED-HL-X2. It includes important safety and operation information. CAUTION DO NOT use in explosive atmospheres, near flammable liquids, or where explosion proof lamps are required. DO NOT use in the proximity of vehicles or equipment when there is a risk of flammable liquids coming into contact with the light. CAUTION: For light duty use only WARNING: Not for use in hazardous locations. INSTALLING BATTERIES 1. Unscrew the battery compartment door on the back of the headlamp. 2. Insert the batteries per the outline inside the battery compartment. Observe the correct polarity of the batteries. 3. Close the battery door and fasten the battery compartment door screw. 4. The headlamp is not ready for use.

Larson Electronics LLC www.LarsonElectronics.com [email protected]

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364 Battery Notes  Batteries may lose power when stored for long periods.  Alkaline batteries can leak and cause corrosion if stored for long periods. Always remove batteries if the light will be unused for extended periods.  Batteries should be stored between 68-78°F (20-25°C) OPERATION Two switches control all functions on this headlamp.  Spotlight Operation To turn on the spotlight, press the spotlight switch. Press again to turn off.  Floodlight Operation The floodlight switch controls 3 floodlight functions. First Press: White Floodlight on – Full power Second Press: White Floodlight on – Half Power Third Press: White Floodlight off – Colored, LED Floodlight on Fourth Press: Floodlight function off HEADBANDS The headlamps include two types of headbands. Elastic Non-Slip Headband – Use this headband for mounting the headlamp directly to your head. The non-slip feature will keep the light positioned on the head even with vigorous movement. Rubber Hardhat Strap – Use the rubber strap on any hardhat. The tacky nature of the strap will keep the headlamp attached even if the hat is dropped. WARRANTY Limited Lifetime Warranty Product is warranted to be free from defects in workmanship and materials for the lifetime of the original owner. This warranty includes the housing, lenses, electronics and switches. Batteries, normal wear and abuse are excluded. Not Covered Consequential damages, incidental damages or incidental expenses, including damage to property. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, which may vary from state to state.

Other Headlamp Manuals