Kenwood KMM-202 Instuction Manual

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan EU Representative: JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands Декларация соответствия относительно Директивы Электромагнитная совместимость Декларация соответствия относительно Директивы 2011/65/EU об ог� ...

or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance. DISPLAY EASY MENU (For ) ON: Both display and button illumination change to white color when entering [FUNCTION]. ; OFF: Both display and button illumination remain as [COLOR SELECT] color. (  11) TUNER SETTI ...

• Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. Clean the connectors. (  13) The unit does not work at all. Reset the unit. (  3) R ...

• Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. Clean the connectors. (  13) The unit does not work at all. Reset the unit. (  3) R ...

Turn on the power Press . • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Select a source Press repeatedly. Change the display information Press DISP repeatedly. (  14) Faceplate How to reset Attach Detach : Flashes when the unit enters searching status. GETTING STARTED Select the display language and cancel the demonstration When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE”  “PRESS” “VOLUME KNOB” 1 Turn the volume knob to select [ENG] (English), [RUS] (Russian) or [SPA]� ...

installation (A) Faceplate Wiring connection (C) Mounting sleeve (B) Trim plate (D) Wiring harness (E) Extraction key When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. If your car does not have an ISO terminal : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Fuse (10 A) Front/ Rear/ Subwoofer output ...