ABB B23 Manuals

1 2 3 ! T1 5-5 1 2 3 ! T1 5-5 1 2 3 ! T1 000010 1 2 3 ! T1 5-5 1 2 3 ! T1 000010 1 2 3 ! T1 0.00 kVV h 1 2 3 ! T1 0.00 kVV h 1 2 3 100-5 1 2 3 000020 1 2 3 CT RAT 1 2 3 ires 1 2 3 20 1 2 3 5-5 1 2 3 3 ires 1 2 3 ! 900-5 1 2 3 ! 4 ires C Out 1 13 15 B2x 1xx-xxx B2x 2xx-xxx B2x 3xx-xxx 13 15 16 17 18 C Out 1 Out 2 Inp 3 Inp 4 I/O (0,25 Nm) OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET 7x 2x 4x 3x xx xx 1 1 2 2 1 1 2 2 3 3 3 4 4 Table 1 Button instruction Button Function Down / Up OK / Exit Set Table 2 Symbol instruction Symbol Action Press this button Press and hold button / Setting sequence Screen is flashing 2x Number of keystrokes Setting finished 1.1 Mounting all model 1 Mounting Ph2 5,5mm 1 2 3 13 mm 2,5mm RS-485 I/O 6 mm 36 37 35 36 37 RS-485 B A C (0,25 Nm) 1. Select a value Select a value when the digit blinks. 2. Cancel a value 3. Change Value Enter the value when the digit blinks. Example: Set CT Ratio 100/5 Example: Set 10 to 20 (Default Menu) (Default Menu) (CT Ratios) (Wires) (Choose from list) (No Neutral) (With Neutral) 1.2 Connection -B24 1.3 Connection -B23 1.4 Connection -B21 2 Explanations 3 Basic settings Table 3 Technical data B21 B23 B24 Nominal voltage 230 V AC 3x230/400 V AC Voltage range 220-240 VAC (-20% to +15%) 3x220-240 V AC (-20% to +15%) Base current Ib 5 A - Rated current In - 1 A Reference current Iref 5 A - Maximum current Imax 65 A 6 A Terminal wire area 1.5 - 25 mm2 0.5 - 10 mm2 Frequency 50 or 60 Hz ± 5% Accuracy Class B (Cl. 1) and Reactive Cl. 2 B (Cl. 1) and Reactive Cl. 2 B (Cl. 1) or C (Cl. 0,5 S) and Reactive Cl. 2 Active energy 1% 0.5%, 1% Environmental Operating temperature -40 to +70°C Storage temperature -40°C to +85°C Humidity 75% yearly average, 95% on 30 days/year Resistance to water and dust IP20 on terminal block without protective enclosure and IP51 in protective enclosure, according to IEC 60529. Mechanical environment Class M2 in accordance with the Measuring Instrument Directive (MID). (2004/22/EC). Electromagnetic environment Class E2 in accordance with the Measuring Instrument Directive (MID), (2004/22/EC). Outputs Current 2 - 100 mA Voltage 5 - 240 V AC/DC. 5 - 40 V DC. For meters with only 1 output. Pulse output frequency Programmable: 1 - 999999 imp/kWh Pulse length Programmable: 10 - 990 ms Terminal wire area 0.5 - 1 mm2 Inputs Voltage 0 - 240 V AC/DC OFF 0 - 12 V AC/DC ON 57 - 240 V AC/24 - 240 V DC Min. pulse length 30 ms Terminal wire area 0.5 - 1 mm2 Standards IEC 62052-11, IEC 62053-21 class 1 & 2, IEC 62053-22 class 0,5 S, IEC 62053-23 class 2, IEC 62054-21, GB/T 17215.211- 2006, GB/T 17215.312-2008 class 1 & 2, GB/T 17215.322-2008 class 0,5 S, GB 4208-2008, EN 50470-1, EN 50470-3 category A, B & C Material Polycarbonate in transparent front glass. Glass reinforced polycarbonate in bottom case and upper case. Polycarbonate in terminal cover. B21/B23 B24 B24 B23/B24 Pulse output Pulse 1 Quantity : Active Energy Import Frequency: 100 Imp/kWh Length: 100 ms Output: 1 Pulse 2 Quantity : Active Energy Export Frequency: 100 Imp/kWh Length: 100 ms Output: 2 Wires Wires: 4 Wires (3 Phases & Neutral) Pulse output Pulse 1 Quantity : Active Energy Import Frequency: 10 Imp/kWh Length: 100 ms Output: 1 Pulse 2 Quantity : Active Energy Export Frequency: 10 Imp/kWh Length: 100 ms Output: 2 CT Ratios CT Ratios: 5/5 S1 S2 S1 S2 S1 S2 6 9 3 4 L1 L2 L3 L1 L2 L3 P1 P2 11 1 2 5 7 8 N N 3 x ≤ 10 A P1 P2 P1 P2 (1,2 Nm) S1 S2 S1 S2 9 L1 L2 L3 L1 L2 L3 P1 P2 1 2 5 7 8 3 x ≤ 10 A P1 P2 3 (1,2 Nm) L1 L2 L3 N 6 9 3 11 4 7 1 L1 L2 L3 N 3 x ≤ 65 A (2,0 Nm) L1 L2 L3 6 9 3 4 7 1 L1 L2 L3 3 x ≤ 65 A (2,0 Nm) L N 1 3 5 L N 1 x ≤ 65 A (2,0 Nm) 1 2 3 ! T1 0.00 kVV h 1 2 3 ! T1 LENGTh 1 2 3 ! T1 100 1 2 3 ! T1 100 1 2 3 ! T1 100 1 2 3 ! T1 OUTPUT 1 2 3 ! T1 1 OUT 1 2 3 ! T1 1 OUT 1 2 3 ! T1 1 OUT 1 2 3 PULSE 1 2 3 QUANT 1 2 3 ! T1 ACt 1 kVV h 1 2 3 ! T1 ACt 1 kVV h 1 2 3 ! T1 ACt 1 kVV h 1 2 3 ! T1 frequen 1 2 3 ! T1 10 kVV 1 2 3 ! T1 000010 kVV 1 2 3 ! T1 10 kVV OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET SET 2x 7x 2x 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 B21/B23/B24 INSTALLATION MANUAL 2CMC485019M0201 May 2016 Rev B Contact us ABB AB P.O Box 1005 SE-611 29 NYKÖPING, Sweden +46(0)21-32 50 00 www.abb.com /low-voltage © Copyright 2016 ABB AB. All rights reserved. Specification subject to change without notice. Avertissement! Installation uniquement par des personnes qualifiées en électrotechnique. Advertencia! La instalación deberá ser realizada únicamente por electricistas especializados. Warning! Installation by person with electrotechnical expertise only. Warnung! Installation nur durch elektrotechnishe Fachkraft. Avvertenzal! Fare installare solo da un elettricista qualificato. 3.2 3.4 B24 - CT Ratios 3.3 B23/B24 - Wires 3.5 Change / Select values 3.2 B21/B23/B24 - Pulse output 3.1 Default settings PZ2 5.5 mm

1 EN B23/B24 INSTALLATION MANUAL Contents Disclaimer ......................................................................................... 2 Copyright........................................................................................... 2 Trademark......................................................................................... 2 Introduction ....................................................................................... 3 Product Overview.............................................................................. 3 Installation......................................................................................... 7 Installation Requirements.................................................................. 8 Troubleshooting ................................................................................ 8 Configuration..................................................................................... 9 Service and Maintenance.................................................................. 9 B23_B24_install.book Page 1 Thursday, May 30, 2013 4:01 PM

1 EN B23/B24 INSTALLATION MANUAL Contents Disclaimer ......................................................................................... 2 Copyright........................................................................................... 2 Trademark......................................................................................... 2 Introduction ....................................................................................... 3 Product Overview.............................................................................. 3 Installation......................................................................................... 7 Installation Requirements.................................................................. 8 Troubleshooting ................................................................................ 8 Configuration..................................................................................... 9 Service and Maintenance.................................................................. 9 B23_B24_install.book Page 1 Thursday, May 30, 2013 4:01 PM