ActionTec GT701D Manuals

Creative Solutions for the Digital Life™ T henewActiontecEthernetDSLModemwithRoutingCapabilities is really two devices rolled into one.It’s a full rate DSL modem and it’s a router, capable of connecting to one computer, via Ethernet port,and even more using a switch or hub,with a minimum amount of hassle. And because of its sleek design, small footprint and ENERGY STAR rating,this“green modem”has become the DSL Modem of choice for many of our customers. Full Rate ADSL2+ Modem ADSL2+ is the DSL standard that enhances modem performance by tripling the available bandwidth (from 8 Mbps to 24 Mbps). Say goodbye to stuttering, pixilated video streams and the endless wait while downloading large files. There’s more room for voice data, as well,soyou canenjoy free orlow-cost Internet telephone conversations. Leading Chipset Architecture The DSL Modem includes TI’s TNETD7100 Broadband Communication Processor and Peripherals. The TNETD7100 is the industry’s most densely integrated system-on-a-chip ever offered to the ADSL CPE market by Texas Instruments. The TNETD7100 is considered an ADSL bridge/router solution, integrating a broadband communications processor and peripherals,ADSL physical layer,ADSL line driver, and Ethernet physical layer. Environment Friendly The new GT701D Ethernet DSL Modem with Routing Capabilities earned the ENERGY STAR rating, signifying that it uses at least 30% less energy than modems with conventional power adapters.With its superior energy efficiency, this DSL Modem helps consumers save money on their electricity bill while protecting the environment through fewer harmful emissions from power plants. In addition to its energy efficient design,the DSL Modem features a small footprint that helps minimize its environmental impact – with less materials, packaging, and waste. Features • Environmentally friendly... Power Supply is ENERGY STAR Certified • Support One ADSL2+ WAN port (RJ11) • Compliant with full-rateANSI T1.413 Issue 2,ITU G.992.1 (G.dmt) and G.992.2(G.lite) standard • Auto-handshake for different ADSL flavors • Bridged Ethernet over ATM, PPP over ATM, PPP over Ethernet • Precise ATM traffic shaping • IP packet routing and transparent bridge • Static IP “Routed” • Routing protocol supports RIP-1, RIP-2, Static Routing • Build-in NAT, DHCP server • DNS relay support • PAP/CHAPauthentication,administrativepasswordsthroughTelnet • Compliant with IEEE 802.3 Ethernet standard • Supports One 10/100 Base-T Ethernet LAN port • Flow control support for Fast Ethernet • Web-based configuration setup • FTP firmware upgradeable • Support web download • TR-069 Remote Management • Service/Website blocking/scheduling • Upstream/Downstream QoS Model # GT701D

Note: The DSL light may blink. Note: If the Ethernet Light does NOT turn green, make sure the Yellow Cable is properly connected on both ends. 1 Connect the Modem to a Computer Step1 Get the DSL Modem from your DSL Quick Start Kit and take it out of the bag. Step4 Plug the larger end of the Power Cord into a Power Outlet. Step5 Make sure the Power Light on the Modem is SOLID Green. Step6 Get the Yellow Cable. Step7 Plug one end of the Yellow Cable into the Yellow Port on the back of the DSL Modem. Flip this Quick Start Guide over to continue NEX Power Outlet Power Cord Step9 Make sure that the Ethernet light on the Modem is Green.This may take a few moments. Yellow Port Yellow Cable Step10 Get the Black or Gray DSL Cable from your DSL Quick Start Kit. Step11 Plug one end of the DSL Cable into the Gray Port located on the back of the Modem. Step8 Make sure that your computer is turned on.Then, plug the other end of the Yellow Cable into the Ethernet Port on the back of the computer. An Ethernet Port looks similar to a regular Phone Jack, but is slightly larger. Step12 Plug the other end of the DSL Cable into the Phone Jack closest to your computer. Gray Port Black Cable example of a typical inline phone filter Phone Port Black Cable Step13 Make sure All Devices with the same phone number as your DSL Line have Phone Filters.This includes telephones, fax machines, caller ID boxes,satelliteTV receivers,TiVo devices, and answering machines. Note: Your Power Cord may look different. Step2 Get the Power Cord from your DSL Quick Start Kit. Step3 Plug the smaller end of the Power Cord into the Black Port on the back of the Modem. Power Cord Black Port Note: If the DSL Light continues to blink, make sure you received notification from your DSL Internet Service Provider that your DSL service has been activate Step14 Make sure that the Power and DSL Lights are solid Green.This may take up to 30 seconds.

DSL Modem Model #: GT701D User Manual Ver 1.0 Solutions for the Digital Life™