ADLINK Technology COM Express nanoX-BASE Manuals
ADLINK Technology COM Express nanoX-BASE Operation & user’s manual (44 pages)
- Identifier: id-1904744
- Brand: ADLINK Technology
- Device: Control Unit
- Type: Operation & user’s manual, PDF
- Key Aspects: Seasonal Maintenance Suggestions, Proven Benefits of Use
- UPD Date: 25.06.2026
- Source File: 1818016.pdf
- Pages: 44
- Description: Operation instructions for the ADLINK Technology COM Express nanoX-BASE. This manual offers stepwise instructions for installation steps, wiring setup, diagnostic information.
Key Pages and Contents:
-
nanoX-BASE User’s Manual
6 Connectors and Pinouts 6.1 Carrier Board Signals 6.2 Connector and Pinout Compatibility Connectors positions and pinouts comply with pinout and signal descriptions in the “COM.0 - COM Express Module Base Specification”. This document includes descriptions of -
nanoX-BASE User’s Manual
SDVO (via Flat Cable connector CN30) - SDVO1 Pin Signal Pin Signal B1 + 12V A1 NC B2 + 12V A2 + 12V B3 NC A3 + 12V B4 GND A4 GND B5 SMB_CK A5 TCK B6 SMB_DAT A6 TDI B7 GND A7 NC B8 + 3.3V A8 TMS B9 TRST# A9 + 3.3V B10 +3.3VSB A10 + 3.3V B11 WAKE# A11 PERST# B12 NC -
September 2, 2013
Part Number: 50-1J030-1020 -
nanoX-BASE User’s Manual
Page 32 6.23 Power Connectors CN1: ATX 24-pin Connector Connect the ATX 24-pin (or 20-pin) connector to supply power to the nanoX-BASE carrier. CN41: ATX 12V 4-pin Connector Connect the ATX 12V 4-pin connector to supply power to the COM Express module. Pin Signal 1 GND 2