American Megatrends Super Voyager PCI-II Manuals
American Megatrends Super Voyager PCI-II Operation & user’s manual (67 pages)
- Identifier: id-120411
- Brand: American Megatrends
- Device: Motherboard
- Type: Operation & user’s manual, PDF
- Key Aspects: Comparative Analysis of Various Features, Energy Efficiency Tips
- UPD Date: 10.08.2026
- Source File: 26856.pdf
- Pages: 67
- Description: Product usage manual for the American Megatrends Super Voyager PCI-II. It offers guidance on installation steps, service procedures, connectivity setup, technical overview.
Key Pages and Contents:
-
Super Voyager PCI-II 486 ISA Motherboard User's Guide
35 Step 9 Connect Onboard I/O, Continued Attaching the Parallel Port Cable A parallel port cable is supplied to connect J23 to the external parallel port connector, as shown below. -
Chapter 3 AMIBIOS and WINBIOS
54 Peripheral Setup, Continued Primary Master IDE LBA Mode Primary Slave LBA Mode Secondary Master LBA Mode Secondary Slave LBA Mode Set these options to Enabled to enable IDE LBA (Logical Block Address) Mode for the primary master, primary slave, secondary master, or s -
Super Voyager PCI-II 486 ISA Motherboard User's Guide
33 Step 7 Connect Cables, Continued J40 Speaker Connector J40 is a four-pin single-inline berg that is attached via a cable to the system speaker. J18 External Battery Connector J18 is a four-pin berg that attaches to an external battery. A batte -
Chapter 3 AMIBIOS and WINBIOS
36 Step 10 Install Floppy Drive J25 is a 34-pin dual-inline berg. Connect the cable from the floppy drive to J25. The onboard floppy controller cannot be used if a hard disk adapter card with floppy controller is installed. The cable and the connector are shown below: T