Ansul CHECKFIRE 110 Manuals

CHECKFIRE 110 DETECTION AND ACTUATION SYSTEM OWNERS’ GUIDE © 2017 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. | Part No. 442044-03 (Brazilian Portuguese, Chinese, English, French, German, Italian, Latin American Spanish, Mongolian, Russian, and Swedish) Français Svenska 中文 Italiano Español Монгол Хэл Pусский Deutsch Português do Brasil CHECKFIRE 110 DETECTION AND ACTUATION SYSTEM OWNERS’ GUIDE © 2017 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. | Part No. 442044-03

One Stanton Street  /  Marinette, WI 54143-2542, USA  /  +1-715-735-7411  /  www.ansul.com Copyright © 2014 Tyco Fire Products LP.   /  All rights reserved.  /  Part No. 440391-03 CHECKFIRE 110 DETECTION AND ACTUATION SYSTEM PLANNING, INSTALLATION, Operation, and Maintenance Manual FOREWORD 2014-AUG-28 REV. 03 CHECKFIRE 110 Detection and Actuation System This manual is intended for use with the ANSUL® CHECKFIRE 110 Detection and Actuation System. This system is specif- ically engineered for monitoring and release of vehicle fire suppression systems. Planning, installation, recharge, and maintenance of the system must conform to the limitations detailed in this manual. Installation and maintenance shall be performed by an individual holding current ANSUL Certification from an ANSUL CHECKFIRE 110 Training Program with train- ing to plan, install, recharge, and maintain the CHECKFIRE 110 System(s). Individuals must also hold current ANSUL Certification from an ANSUL A-101 or LVS training program. Those who plan, install, operate, reset, program, inspect, or maintain these systems should read this entire manual. Specific sections will be of particular interest depending upon one’s responsibilities. As with all electro-mechanical-pneumatic equipment, the system needs periodic care to provide maximum assurance that it will operate effectively and safely. Inspection frequency shall be performed consistently, depending on operating and/ or environmental conditions. Maintenance shall be performed semi-annually, or more frequently, depending on operating and/or environmental conditions. The application and use of the CHECKFIRE 110 System is limited to the applications and uses described in this manual. For other applications, contact your Authorized ANSUL Distributor, Territory Manager, or Tyco Fire Protection Products – Technical Services Department, Marinette, Wisconsin 54143- 2542, USA. Note: The converted metric values in this manual are provided for dimensional reference only and do not reflect an actual measurement. Part Number: 440391-03 Date: 2014-AUG-28 ANSUL, CHECKFIRE, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited.