Aube Technologies TH209 Manuals

TH209 Non-programmable Thermostat Owner’s Guide 69-2771EF-07

TH209 400-209-000-A 2008-06-19 1/2 This thermostat can be used to control an electric heating system such as a baseboard heater, a radiant floor,a radiant ceiling, or a con- vector. The thermostat CANNOT be used with: • a resistive load under 0.83 A • a resistive load over 8.3 A • a system driven by a contactor or a relay (inductive load) • a fan-forced heating system (e.g. : fan-forced convector) • a central heating system SUPPLIED PARTS • One (1) thermostat • Two (2) 6-32 mounting screws • Two (2) solderless connectors TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRIC SHOCK. Loosen the screw holding the faceplate to the base. The screw can- not be completely removed and remains captive on the base. Remove the faceplate from the base by pulling the bottom half. Connect any one of thermostat wires to the heater (load) wire and the other one to the power supply wire using solderless connectors for copper wires. (The thermostat wires are non-polarized; either wire can be connected to the load or to the power supply.) NOTE: All cables and connections must conform to the local electri- cal code. Special CO/ALR solderless connectors must be used when connecting with aluminium conductors. Install the base onto an electrical box. Reinstall the faceplate on the base and secure it in place with the screw. NOTE: Keep the air vents of thermo- stat clean and unobstructed at all times. n Description 1. o Installation 2. Temperature display Temperature adjustment buttons Up button Down button} Heating intensity indicator. No image appears when heating is off. 2-wire installation 4-wire installation TH209 User Guide Electronic Thermostat