Blink Basic Charger-32A Manuals
Blink Basic Charger-32A Installation manual (22 pages)
- Identifier: id-2219099
- Brand: Blink
- Device: Battery Charger
- Type: Installation manual, PDF
- Key Aspects: Guidelines for Regular Maintenance, Future Product Updates, User Guide for Non-Technical Users
- UPD Date: 20.08.2026
- Source File: 2068533.pdf
- Pages: 22
- Description: Service and user manual for the Blink Basic Charger-32A. This manual explains replacement parts, control functions, software configuration.
Key Pages and Contents:
-
3. Plug in the power cord. (for BC3/SC3 ONLY)
The outlet should be located at 20-26 inch from the ground. Refer to the installation template to decide where to install the charge point. Figure 2-8 Plug in the power cord 10 Basic/Smart/Intelligent Charger-32A Installation Manual Rev. 4.0 BlinkCharg -
2.6 Install the Holster
1. Separate the holster from hook. Figure 2-14 Separate the holster 2. Fasten the hook on the wall with appropriate screws. 2-1. For finished walls supported by wood studs, use #12 tapping screws (x2). 2-2. The recommend torque is 25 kgf.cm (21.7 lb-in). Figure 2-15 Secure th -
5. Keep the holster in this state and tighten screws completely.
Figure 2-17 Lock screws 6. Place EV charging plug on the holster. Figure 2-18 Place EV charging plug 17 Basic/Smart/Intelligent Charger-32A Installation Manual Rev. 4.0 BlinkCharging.com • (888) 998.2546 ©2021 Blink Charging Co. � -
2. Mount charge point onto mounting bracket and lock the screw.
2-1. Put the charge point on the mounting bracket. 2-2. Fix the charge point on mounting bracket by M4 screw and screw washer. 2-3. Please refer to the following torque. Screw Torque M4 16 kgf.cm 13.88 lb/in Figure 2-6 Charge point and