Boss TPSE201 Manuals

1 Instruction Manual TPSE201 (181422) - BOSSTM Universal Programmer TPSE101 (569565) - BOSSTM Universal Timeswitch Thank you for purchasing this product. If installing for someone else, please ensure that the instructions are handed to the householder. Please read this manual prior to installation or use. Retain for future reference. Always isolate the mains supply before removing the unit from the backplate. Please leave these instructions with the end user where they should be kept in a safe place for future reference Installation The TPSE201/TPSE101 is easily installed using the backplate supplied. This can be mounted directly to the wall or a single gang recessed box using the holes provided; cable entry is from the rear. Specification Power supply 230V/50Hz Switch rating 6(2)A Switch type Single pole, double throw (SPDT) Operating temperature 0°C - 50°C Storage conditions -20°C - 60°C Frost protection temperature 5°C Programme 5/2, 7 day or daily selectable by jumper 3 setting per day Time display 12 or 24 hour Memory Internal memory back-up Backlight Green LED Switches/Jumpers The installer should select the jumper positions required if changing from the factory pre-sets, these jumpers are found on the rear of the unit. Always enable the internal memory back up battery before installing the unit, Switch/Jumpers Function Program type 3x2 pins jumpers for 5+2 days (factory default setting), 7 days program or daily P/G (TPSE201 only) 3x1 pin jumper for fully pumped and controlled system (factory default setting) or gravity-fed hot water system. Internal backup battery 3x1 pin jumper to enable/disable the internal backup battery (disabled is the factory default setting)