bouncepad Flex Manuals

Mount Washer M4 Split washer M4 Wing Nut Mount Washer M4 Split washer M4 Locking Nut 7mm Spanner Sheet Code: BP-IM-031_REV2 Release Date: 28/10/2019 Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder. Surface Mounting Kit Flex Mounting Arm Faceplate Case Fixings Kit Tablet Set-up Kit Follow steps A if “Fixing from below”. A Follow steps B if “Fixing from Above”. B Locate and screw the Socket screws into one end of the Flex. Locate and secure to the surface. Locking Nuts offer higher security. Go to step 1. A3 A4 A5 Using the Mount washer, mark the drill hole locations as shown. A1 Front Drill each hole - using the specified drill size. A2 Using the Mount Plate, mark the drill hole locations as shown. B1 Mount Plate Front 4x Ø2.5mm 1x Ø16.0mm 25mm Metric Imperial 1" Maximum Mounting surface thickness : 34mm Metric Imperial 1 5/16" Minimum Mounting surface thickness : 4x Ø5.0mm Ø5.0mm Drillbit Ø16.0mm Holesaw 1x Ø16.0mm Mount Washer Flex Assembly Instructions Tools Required: Pencil Electric Drill 16mm Holesaw *if routing the tablet cable through your mounting surface 7mm Spanner *or adjustable spanner 2.5mm Drillbit *if fixing from above 5.0mm Drillbit *if fixing from below Pair of Keys In the Box Fixings List * Due to the modular nature of our product range you may receive additional fixings in the fixings kit 4x No.8 Countersunk, Self tapping Screw 4x M4x40mm Socketset screw 4x M4x16mm Buttonhead screw 4x M4x12mm Countersunk Screw 8x M4 Split Washer 4x M4 Locking Nut 1x Case Washer 1x Mount Washer 4x M4 Wing Nut Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. *see overleaf Drill each hole - using the specified drill sizes. B2 Ø2.5mm Drillbit Ø16.0mm Holesaw Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. Socket Driver 1x T20 Pin Torx Driver Bit

Bouncepad Flex Assembly Instructions What’s in the box? Tools you’ll need... a e f b c Tools Key a 1 2 4 3 5 d d d 6 2 Attach Socket Setscrews to the Flexible Mounting Arm. 3 Attach the Flexible Mounting Arm to your surface. For faster installation use the 4 x M4 Wingnuts ( ) in place of the M4 Hex Nuts. You will need to feed the USB cable through before fully tightening the wingnuts due to their larger size and shape. 7 2 13 2 e Remember, wingnuts can be undone by hand, so consider the security of your installation before choosing this mounting method. Pencil Drill 5/8” Drill Bit 1/4” Drill Bit Adjustable Wrench Socket Screwdriver b a 5 b e c f c d + To mount from beneath the surface drill the mounting holes in your surface using the Mounting Washer as a template. If you wish to secure the Bouncepad from above your surface, use the Surface Mounting Kit provided. See point 9 for more details. d d d d 7 8 5 6 9 10 11 12 13 2 4 Note your key number 3 14 1 1 2 3 4 5 6 7 8 9 10 11 12 Secure Case Flexible Mounting Arm Surface Mounting Kit Key x 2 Mounting Washer Case Washer M4 Wingnut x 4 T20 Pin Torx Driver Bit M4 Round Washer x 4 M4 Hex Nut x 4 M4 x 10mm Pin Torx Countersunk Screw x4 M4 x 16mm Pin Torx Buttonhead x4 M4 x 40mm Socket Setscrew x 4 No. 8 x 1 “½ Pin Torx Self Tapping CSK Screw x4 Components Key 13 14 5 9 10 13 toll free 1-888-423-3885 l local 1-617-275-8131 l www.thebouncepad.com l Bouncepad North America, Inc. 50 Terminal St, Unit 710, Building 2, 7th Floor, Charlestown, MA 02129, USA l 2013 Bouncepad Spotspot Ltd. All rights reserved. 1/4” 5/8” 33/64” 33/64” c

Assembly Instructions Flex VESA Flip Lounge 1.