Brother LS-1717 Manuals

Brother LS-1717 Quick setup (2 pages)

• Identifier: id-164001
• Brand: Brother
• Device: Sewing Machine
• Type: Quick setup, PDF
• Key Aspects: User Operation Guidelines, Best Practices for Use, Firmware Update Process
• UPD Date: 15.05.2026
• Source File: 79853.pdf
• Pages: 2
• Description: Full user manual for the Brother LS-1717. This manual explains supported accessories, replacement parts, setup tips, technical assistance.

Key Pages and Contents:

• 
• 

Brother LS-1717 Instruction manual (82 pages)

• Identifier: id-164003
• Brand: Brother
• Device: Sewing Machine
• Type: Instruction manual, PDF
• Key Aspects: Introduction to Functionality and Capabilities, Integration with Other Systems, Safety Features Description
• UPD Date: 09.08.2026
• Source File: 79856.pdf
• Pages: 82
• Description: User and installation guide for the Brother LS-1717. It provides information on installation and wiring setup, product handling, device instructions.

Key Pages and Contents:

• 
• 
• 
• 
• 
• 
• 
• 

Brother LS-1717 Parts reference list (15 pages)

• Identifier: id-681084
• Brand: Brother
• Device: Sewing Machine
• Type: Parts reference list, PDF
• Key Aspects: Practical Advice for Users, User Rights and Responsibilities, Regulatory Compliance Information
• UPD Date: 04.06.2026
• Source File: 677360.pdf
• Pages: 15
• Description: Essential instructions for the Brother LS-1717. It describes step-by-step setup validation, device calibration, firmware installation.

Key Pages and Contents:

• 
• 
• 
• 
• 
• 
• 
• 

Brother LS-1717 Service manual (20 pages)

• Identifier: id-858982
• Brand: Brother
• Device: Sewing Machine
• Type: Service manual, PDF
• Key Aspects: Best Practices for Troubleshooting, User Guide for Non-Technical Users, Device Features Over Time
• UPD Date: 12.08.2026
• Source File: 885594.pdf
• Pages: 20
• Description: Instruction reference guide for the Brother LS-1717. It offers details on maintenance, operational guidelines, setup validation, user preferences.

Key Pages and Contents:

• - 9 -

  Tension of the timing belt Standard • The belt should slacken approx. 4 - 6mm under a 2N (200g) load. Adjustment 1. Loosen the setscrews � on the motor holder �. 2. Move the motor � to make adjustment. 3. Retighten the setscrews �.

• - 8 -

  Height of the needle bar Standard • When the needle is at the right side, the shuttle hook point is aligned with the left side of the needle, the shuttle hook point lower edge should be 0.8 - 1.2mm above the upper edge of the needle eye. Adjustment 1. Set the stitch width konb to 5, then low

• - 3 -

  Clearance between the shuttle driver and the race way Standard • The shuttle driver should rotate smoothly, no play should be felt in the race way. Adjustment 1. Loosen setscrews � of the driver shaft gear �. 2. Adjust the clearance of the driver shaft �. 3. Retighten the setscrews �

• Printed in TAIWAN