CDN PT2 Manuals

Features • 4 channels • Programmable • Dual function • Memory • Counts up & down in 4 channels separately or simultaneously • Clock • Stopwatch • Loud and long alarm • Individual channel sounds • Stop and restart • Counts up after zero • Food-safe ABS plastic • Sliding mode switch • 4-way mounting: pocket clip/magnet/stand/loop • Battery and instructions included Note: Remove sticker from display before use. Note: In the following instructions, names of the control buttons are shown in CAPS. Function information that appears on the display is shown in BOLD CAPS. Battery Installation Replace battery when LCD becomes dim or alarm level declines. 1. Remove battery door by turning it counterclockwise. 2. Install a 1.5 V button battery with positive (+) side up. 3. Replace battery door and lock it by turning it clockwise. Operating Instructions A. Set Clock 1. Select CLOCK mode with sliding mode switch. 12:0000 AM will appear after inserting battery. 2. Press and hold ENTER approximately 2 seconds until the display flashes. 3. Press HR, MIN and SEC to enter the desired time. Press and hold button for fast advance. 4. Press ENTER to exit. The PT2 will automatically exit 3 seconds after the last entry. B. Count Down 1. Select COUNT DOWN mode with sliding mode switch. COUNT DOWN will appear on the display. 2. Press HR, MIN and/or SEC to enter the desired time. Press and hold button for fast advance. 3. Press START/STOP to start the count down. Press START/STOP button to interrupt the count. Press START/STOP button again to resume the count. 4. When the desired time is reached, alarm will sound and the timer will start to count up the “overtime”. OT (OverTime) and COUNT UP will appear on the display while TIME’S UP flashes. 5. Press START/STOP to stop the alarm. The alarm will stop automatically after 60 seconds while the count up continues. 6. Press CLEAR to reset to 0:0000. Note: The timer will retain any time showing on the display when the sliding mode switch is moved to another position. Model: PT2 4-Event Timer & Clock Counts 100 hours by minutes & seconds