Cisco IGX 8 Manuals

A P P E N D I X -1 System Specifications A This appendix contains system specifications. General This section provides general system information on the IGX 8. System Capacity: 1 shelf with 8 card slots. Requires 2 dedicated front slot(s) for NPMs. Requires 2 dedicated back slots for SCMs (1 slot with blank plate). Up to 6 T1/E1 circuit ports. Up to 6 T1/E1 packet trunks. Up to 48 synchronous data ports. Up to 25 Voice, Data, and/or Frame Relay Module groups. Enclosure Size: IGX 8 Standalone/Rackmount: Height: 25 ins. (63.5 cm) standalone; 24.5 ins. (62.3 cm), rack Width: 19.9 ins. (50.5 cm), standalone; 19 ins. (48.3 cm.), rack Depth: 26.5 ins. (67.3 cm), standalone and rack-mount Shipping Weight: 270 pounds (122.7 kilograms) Clearance Requirement: Min. clearance: 30 inches front; nominal 30 ins. rear; 12 ins. side. Power Input Voltage: AC system: 100 to 240 VAC (90–264 under-voltage and over-voltage tolerance), 47 to 63 Hz. DC system: –42 to –56 VDC. Each AC supply can provide up to 400 watts to the card shelves. Space for 4 power supplies. Current Requirements: Configuration dependent - use Network Design Tool for exact requirements. For planning purposes, use the following: • AC System 10 Amps Max. for 110 VAC, 5 A for 220 VAC. • DC System 20 Amps max. at –48 VDC; 25 Amps at –42 VDC (worst case)