Citizen frisco Manuals

MANUAL UP Button POWER Button DOWN Button Assist Level Battery Capacity Cruise Function Power-Assisted Function Single Trip Time Total Trip Time Throttle Display 6Km/H Power Assist Riding Speed (metric) Riding Speed (US) Maximum Speed Average Speed Distance (metric) Distance (US) Trip Distance Total Distance Battery Voltage Brake Display Backlight & Headlight 1 2 3 4 5 6 7 9 10 8 11 12 13 14 Km/H MPH MXS AVS KM MIL DST ODO VOL ASSIST CRUISE PAS TM TTM THROTTLE 14 13 12 11 10 9 7 6 5 4 3 2 1 8 1. ON/OFF Hold the button long enough to turn on the power. Hold a second time to turn off the power. When the motor stops driving and the e-bike is not in use for 5 consecutive minutes, it will automatically shut down and turn off the motor power supply. OPERATING INSTRUCTIONS Hold the button long enough to turn on backlight and headlights. Hold a second time to turn them off. 2.1 Turn On Backlight & Headlights Hold the or button shortly to switch to levels 1-5. Level 1 is for minimum power and Level 5 is for the maximum power. Each startup will automatically restore to the last setting. Level 0 is for no assist. 2.2 Assist Level (ASSIST) Switch Hold the button. When flashes, the bike drives at a speed of no higher than 6Km/h. Release the button to disengage. 2.3 6KM/H Assist Function By using the throttle, THROTTLE mode will display. 2.4 THROTTLE Display When using power-assisted riding, the PAS Display mode is activated. 2.5 PAS Display Once the cruise function is turned on and the trip riding speed is greater than 7Km/h, hold down the button to enter cruise mode. To cancel, just brake or hold any button. 2.6 CRUISE Function After the power has been turned on for 5 seconds, hold down the and buttons at the same time. The single trip riding time (TM) ans the single trip distance (DST)will flash. Hold the shortly to clear the content. 2.7 Display & Delete Single Data