Cochlear Nucleus Kanso Manuals

True Wireless™ Accessories User Guide

Cochlear™ Nucleus® Kanso™ Sound Processor Bimodal Pairing and Streaming Manual

Microphones 1 Turn off ReSound Hearing Aid and Kanso Sound Processor 2 Turn on microphone Note: The LED will flash yellow while device is in pairing mode for 20 seconds. Note: When bimodal pairing, first ensure hearing devices are programmed to opposite ears. 20 seconds Press the Kanso button to turn on. Press the Kanso button to turn on. Press the Kanso button to turn on. Press and hold Kanso button until the light is a steady orange. Press and hold Kanso button until the light is a steady orange. Note: The LED will flash yellow while device is in pairing mode for 20 seconds. TV Streamers 1 Plug power and audio cables into TV Streamer and connect to audio source 20 seconds 3 Press pairing button 4 Turn on ReSound Hearing Aid, pause 2 seconds, then turn on Kanso Sound Processor 2 Turn off ReSound Hearing Aid and Kanso Sound Processer 3 Locate and press the round pairing button on back by the clip 1 Turn on ReSound Hearing Aid then Kanso Sound Processor 2 Turn on microphone or turn on TV Streaming to one or both hearing devices Note: Streaming must be started and stopped on each device individually. Press and hold button for 2 seconds then release to stream audio. Microphones and TV Streamers A Kanso Sound Processor A Press and hold the push button on your ReSound Hearing Aid for 3 seconds OPTION OPTION B CR210 Remote Control Long-press the Telecoil button. Audio will start streaming through the microphone. OPTION C Using CR230 Remote Assistant OPTION Long-press the Telecoil button. 4 Turn on ReSound Hearing Aid, pause 2 seconds, then turn on Kanso Sound Processor B Using ReSound Unite Remote If you have a ReSound Unite™ Remote Control (optional), simply press the streaming button on this Remote Control. OPTION Cochlear™ Nucleus® Kanso™ and ReSound Wireless Pairing & Streaming Maximize your hearing with both ears1 1 Wolfe, Jace. “Why Two Are Better Than One.” Presented at ACIA 2014, Nashville, TN. Switch on. Note: Ensure microphone is fully charged. Note: Press and release again if you need to cycle to the next audio source. This is necessary if your audiologist enabled the Telecoil as this is the first streaming audio source.