Cocoon IT315003 Manuals

1. UNPACK Unpack the Cocoon Single Outdoor HD Wireless IP Camera from the packaging and check you have all the components: 1x IP Camera 1x Wi-Fi Antenna 1x Adaptor 1x 1M Ethernet Cable 4x Mounting Screws with sleeves 1x Allen Key 1x CD-ROM 1x Getting Started Guide 1x Instruction Manual 1x Warranty Card After Sales Support 1300 663 907 www.winplus.com.au 4. DOWNLOAD AND SETUP COT PRO a. Using an Android device; install the ‘COT Pro’ app from the Google Play Store* b. Using an Apple device; install the ‘COT Pro’ app from iTunes App Store* Once the app has downloaded and completed installation, launch the app If this is your first time using COT Pro, you will need to create an account. Select ‘Register by email’ at the bottom of the COT Pro login screen and follow the steps to create a new account IT315003 11/2015 Note - The following steps will guide you through setting up using P2P with a smartphone device 3. CONNECT TO POWER Using the included power adaptor, connect one end to the Adaptor Port on the IP Camera, then connect the other end to a power outlet and switch on Note - The antenna will have some connector thread remaining 2. ATTACH ANTENNA Screw the Wi-Fi Antenna onto the connector located on the side of the IP Camera, until the antenna is firmly in place Note - Data charges may apply if downloading via mobile connection, check with your mobile carrier for details. ALDI Stores & the supplier (Winplus) take no responsibility for data charges. Note - “Register by phone” is currently not available in Australia. You can also scan this QR code with your Android or iOS device to download the app Getting Started Guide Single Outdoor HD Wireless IP Camera 5. INSERT ETHERNET CABLE Insert Ethernet cable into the camera’s Ethernet port. Insert the other end of the cable into your router’s Ethernet port

INSTRUCTION MANUAL Model Number: IT315003 Single Outdoor HD Wireless IP Camera