Code 3 C3100 Manuals

Page 1 of 4 SINGLE/DUAL C3100 & C3900 SPEAKER MOUNT 2013+ Ford PI Sedan IMPORTANT! Read all instructions before installing and using. Installer: This manual must be delivered to the end user. Installation and Operation Instructions WARNING! Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious injury, and/ or death to those you are seeking to protect! Do not install and/or operate this safety product unless you have read and understood the safety information contained in this manual. 1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure the safety of emergency personnel and the public. 2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical connections. 3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle damage, including fire. 4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of the system is maximized and the controls are placed within convenient reach of the operator so that they can operate the system without losing eye contact with the roadway. 5. It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people, vehicles or other obstructions. 6. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal. Never take the right-of-way for granted. It is the vehicle operator’s responsibility to be sure they can proceed safely before entering an intersection, drive against traffic, respond at a high rate of speed, or walk on or around traffic lanes. 7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device. Specifications*: *values given are for a single speaker Single C3900 w/o Bracket w/ Bracket Weight: 2.78 lbs 5.77 lbs Dimensions: 1.5 in (L) 5.5 in (L) 6.0 in (W) 11.0 in (W) 6.0 in (H) 14.0 in (H) Power: 100 Watt Impedance: 11 Ohm WARNING! Sirens produce loud sounds that may damage hearing. • Wear hearing protection when testing • Use siren only for emergency response • Roll up windows when siren is operating • Avoid exposure to the siren sound outside of vehicle Single C3100 w/o Bracket w/ Bracket Weight: 5.28 lbs 8.28 lbs Dimensions: 3.15 in (L) 7.15 in (L) 6.33 in (W) 11.0 in (W) 6.33 in (H) 14.0 in (H) Power: 100 Watt Impedance: 11 Ohm

Page 1 of 4 Installation and Operation Instructions C3100 Speaker Mtg Kit 2011+ Charger IMPORTANT! Read all instructions before installing and using. Installer: This manual must be delivered to the end user. WARNING! Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious injury, and/ or death to those you are seeking to protect! Do not install and/or operate this safety product unless you have read and understood the safety information contained in this manual. 1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure the safety of emergency personnel and the public. 2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical connections. 3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle damage, including fire. 4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of the system is maximized and the controls are placed within convenient reach of the operator so that they can operate the system without losing eye contact with the roadway. 5. Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an air bag deployment area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal injury or death. Refer to the vehicle owner’s manual for the air bag deployment area. It is the responsibility of the user/operator to determine a suitable mounting location ensuring the safety of all passengers inside the vehicle particularly avoiding areas of potential head impact. 6. It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people, vehicles or other obstructions. 7. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal. Never take the right-of-way for granted. It is the vehicle operator’s responsibility to be sure they can proceed safely before entering an intersection, drive against traffic, respond at a high rate of speed, or walk on or around traffic lanes. 8. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.

Page 1 of 8 IMPORTANT! Read all instructions before installing and using. Installer: This manual must be delivered to the end user. WARNING! Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious injury, and/or death to those you are seeking to protect! 1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure the safety of emergency personnel and the public. 2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical connections. 3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle damage, including fire. 4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of the system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing eye contact with the roadway. 5. It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people, vehicles or other obstructions. 6. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal. Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, drive against traffic, respond at a high rate of speed, or walk on or around traffic lanes. 7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device. Do not install and/or operate this safety product unless you have read and understand the safety information con- tained in this manual. Installation and Operation Instructions C3100 & C3900 SPEAKER MOUNT 2018+ FORD F-150 AND EXPEDITION WARNING! Sirens produce loud sounds that may damage hearing • Wear hearing protection when testing • Use siren only for emergency response • Roll up windows when siren is operating • Avoid exposure to the siren sound outside of the vehicle Specifications*: *specifications for a single C3900 speaker w/o Bracket w/ Bracket Power: 100 Watt Impedance: 11 Ohm Weight: 2.8 lbs 7.2 lbs Dimensions: 1.61 in(L) 5.86 in(W) 5.96 in(H) 6.95 in(L) 9.25 in(W) 8.47 in(H) *specifications for a single C3100 speaker w/o Bracket w/ Bracket Power: 100 Watt Impedance: 11 Ohm Weight: 5.3lbs 9.7 lbs Dimensions: 6.25 in(L) 3.25 in(W) 6.25 in(H) 9.25 in(L) 8.5 in(W) 7.5 in(H)

INSTALLATION MANUAL C3100 PASSENGER SIDE SPEAKER MOUNTING BRACKET Read all instructions and warnings before installing and using. This manual must be delivered to the end user of this equipment. IMPORTANT: Installation & Mounting.........................................................2-4 Parts List...............................................................................5 Notes:...................................................................................6-7 Warranty................................................................................8 CONTENTS: For future reference record your product's serial no. here __________________________________________ INSTALLER: 2005 - PRESENT IMPALA PPV Utilizing non-factory supplied screws and/or mounting brackets and/or the improper number of screws may result in loss of warranty coverage on the equipment. WARNING!

1 INSTALLATION & OPERATION MANUAL Read all instructions and warnings before installing and using. This manual must be delivered to the end user of this equipment. IMPORTANT: INSTALLER: 2015 FORD F-150 NO-DRILL INSTALLATION OF C3100 SPEAKER (S) 2015 FORD F-150 C3100 SPEAKER INSTALLATION Table of Contents: Page No: Description: 1. Pre-installation preparation 2. Installation instructions 3. Installation notes 4. Warranty Information Preparation for Installation: Hardware provided for this installation will help prevent galvanic corro- sion from taking place due to dissimilar metals. 1. The mounting of C3100 speaker using the clamp-on design bracket will avoid the need for drilling into the aluminum body of the new Ford F150 truck. 2. The Loop and Pile Pads at the top of the assembly will prevent lateral movement of the unit once the bracket system is tightened into position.

C3100 Speaker Bracket Kit 2007 Ford Expedition Installation & Owners Manual WARNING Sirens produce loud sounds that may damage hearing • Wear hearing protection when testing • Use siren only for emergency response • Roll up windows when siren is operating • Avoid exposure to the siren sound outside of vehicle Read all instructions and warnings before installing and using this equipment. INSTALLER: This manual must be delivered to the end user of this equipment. IMPORTANT: