Contec F&eIT Series Manuals

HABEN SIE FRAGEN ODER WÜNSCHEN SIE EIN INDIVIDUELLES ANGEBOT? Unser Team berät Sie gerne persönlich. TELEFON + 49 (0) 81 41/36 97-0 TELEFAX + 49 (0) 81 41/36 97-30 E-MAIL [email protected] WWW.PLUG-IN.DE ADRESSE Am Sonnenlicht 5 D-82239 Alling bei München Erwähnte Firmen- und Produktnamen sind zum Teil eingetragene Warenzeichen der jeweiligen Hersteller. DATENBLATT RRY-4(FIT)GY

Ver.1.01 CNT24-2(FIT)GY 1 F&eIT Series Isolated Counter Module CNT24-2(FIT)GY * Specifications, color and design of the products are subject to change without notice. Congratulations on your recent purchase of an Insulator Counter Module. This product counts high-speed pulses so that the pulses can be processed within a F&eIT-series controller module . As such, this product can be used for position alignment control in combination with an encoder. The insulation between external signals and the Controller Module permits the use of the Controller Module without compromising the communications features of the latter. This product can perform 24-bit up and down counting covering two channels. This product can count two-phase signals, such as rotary encoders and linear gauges. This product is equipped with general-purpose input signals, with one point per channel. A rotary switch allows you to set device IDs to help you keep track of device numbers. The system incorporates a screw less connector plug that allows you to easily attach and detach wires without using any special tools. Similar to other F&eIT series products, the system, in the module itself, incorporates a 35mm DIN rail mounting mechanism as a standard item. A connection to a controller module can be effected on a lateral, stack basis in a unique configuration, which permits a simple, smart system configuration without the need for a backplane board. Specifications Item Specification Counter input section Channel count 2 Counting system Up/down counting Max. count FFFFFFH (binary data) Input type Opto-isolated input (for current sinking output) Input signal Phase A/UP Phase B/DOWN Phase Z/CLR General-purpose input Internal resistance 220 and above Input ON current 15 - 25mA Input protection circuit Not avilable Response frequency 500kHz duty 50% (Max.) External power 5V - 12VDC ±10% 400mA (Min.) Digital filter 0.1sec - 105.6sec Interrupt IRQ5 or IRQ7 or IRQ9 *1 Programmable timer 1msec - 200sec *1 Match-signal output section *2 Output count One x 2 channels Output type Opto-isolated open collector output (current sinking type) (negative logic) Rated output 35VDC 50mA (Max.) Pulse width 0 - 104.45msec Output signal width Not avilable External power 5V - 12VDC ±10% Common section Internal power consumption 5VDC±5% 180mA (Max.) Maximum distance of signal extension 30m External dimensions (mm) 25.2 (W) x 64.7 (D) x 94.0 (H) (exclusive of protrusions) Weight (module itself) 100g Module connection method Stack connection by the connector that is provided with the side of module Module installation method One-touch connection to 35mm DIN rails (standard connection mechanism provided in the system) Applicable wire AWG 28 - 20 Applicable plug FK-MC 0,5/9-ST-2,5 plug (made by Phoenix Contact Corp.) *1 Available only when the CNT24-2(FIT)GY is connected to the CPU-SBxx(FIT)GY. *2 Not supported if connected to a CPU-CA10(USB)GY CAUTION When connecting the Module to a controller module, the internal power consumption should be taken into account. If the total current exceeds the capacity of the power supply unit, the integrity of the operation cannot be guaranteed. For further details, please see the Controller Module manual. Depending upon the specific controller module that is used, some of the functions are not supported. Specification Features PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de

Reference Manual CONTENTS 5VDC AC-DC Converter PWD-25AWD5 Introduction .................................................................. 3 Safety Precautions ...................................................... 8 Installation ................................................................... 13 Functions...................................................................... 16 Appendix ...................................................................... 22 Customer Support and Inquiry ........................... 26

F&eIT Series Isolated Analog Input Module ADI12-8(FIT)GY User’s Manual CONTEC CO.,LTD.

F&eIT Series I/O Controller Module CPU-CA10(FIT)GY CPU-CA20(FIT)GY User’s Manual CONTEC CO., LTD.

F&eIT Series Reed Relay Output Module RRY-4(FIT)GY User’s Manual CONTEC CO.,LTD.

F&eIT Series Isolated Counter Module CNT24-2(FIT)GY User’s Manual CONTEC CO., LTD.

MANUAL HABEN SIE FRAGEN ODER WÜNSCHEN SIE EIN INDIVIDUELLES ANGEBOT? Unser Team berät Sie gerne persönlich. TELEFON + 49 (0) 81 41/36 97-0 TELEFAX +  49 (0) 81 41/36 97-30 E-MAIL [email protected] WWW.PLUG-IN.DE ADRESSE Am Sonnenlicht 5 D-82239 Alling bei München Erwähnte Firmen- und Produktnamen sind zum Teil eingetragene Warenzeichen der jeweiligen Hersteller. SH-8008(FIT)H

F&eIT Series Isolated RS-422A/485 1ch Communication Module COM-1PD(FIT)GY User’s Manual CONTEC CO.,LTD.

F&eIT Series Isolated High-Resolution Analog Input Module ADI16-4(FIT)GY User’s Manual CONTEC CO., LTD.