Contixo F10 Manuals

TROUBLESHOOTING @Nnxo' F1O DRONE @ INSTRUCTION JVIANUAL lssue Po$sibl6 Cas6 Sqluflon The F10 will not initialize The F10 was moved during initialization. Turn the Fl 0 offthen back on again, and ensure it does not move during the ihitialization process. Flight battery will not charge Poor connection behreen the USB cable and the flight battery. Check your connections on both the USB cable and the flight battery. F10 motors will nol siart F10 is ln No Fly Zone. Move at least 4 miles away from no fly zone. lvlost major airports are no fly zone areas. F10 is above 8,000 feet above I\,4SL. Move the F10 below 8,000 feei above MSL. lncorrect motor startup procedure Review Motor Starting/Stopping procedure in manual. F10 is too close to a metal oblect or metal surface- Move the F10 alay from large metal olljects or surfaces. F'10 beeps constantly and motors won't start FMFRGENCY Ivlode. Possibly due to obstructed propeller during motor start up. Check that nothing is obstructing any propeller/motor, tum the F10 off then back on again. F10 will not hold position in hover Weak wireless signal. Conflrm that the flying area has 1 00 degrees of clear view of the sky. CONTACT CONTIXO: [email protected] rrrrwnrv.contixo.com CONTIXO is a trademark of Contixo lnc. o2016 Contixo lnc. All rights reserved.