Crane Electronics WrenchStar Mult Manuals

Crane Electronics Ltd The force in torque management WrenchStar Multi - Pairing Guide Getting started with your digital torque wrench. TCI Home Page On the TCI/TCI Multi web page on your browser, click on the ‘Wrench Status’ tab on the main navigation menu at the top. Please note. For more information about the initial setup of the TCI/ TCI Multi on your PC, please refer to the TCI Quick Start Guide. 1 Select Wrench Number Under the ‘Get results from transducer’ and ‘Pair TCI with transducer’ drop down menus, ensure the number selected relates to the number of the wrench that you are pairing to the TCI Multi. e.g. if this is the first wrench to be paired, select number 1, if it is the second wrench to be paired, select number 2 etc. 2 Pair Mode Ensure the WrenchStar Multi is in ‘pair’ mode by pressing and holding down the blue ‘pairing’ button on the wrench until the LED light turns purple. 3 Reset Button WrenchStar Multi TCI On/Off and Pairing Button WrenchStar Multi Torque Limit LED Display Screen Status LEDs Pairing with a TCI or TCI Multi Line-side Controller Pair TCI Underneath the ‘Pair TCI with transducer’ drop down menu, click ‘Pair’ and the wrench should connect, which is confirmed by the LED light turning blue on the wrench and also on the corresponding wrench number on the front of the TCI/TCI Multi. 4 LED Light 360o Status Light Ring