CTEK BATTERY ANALYZER Manuals

EN • 3 + + – – TEST DOWN UP BATTERY ANALYZER + + – TEST DOWN UP BATTERY ANALYZER 1 2 3 4 5 CONGRATULATIONS On the purchase of your new professional CTEK Battery Analyzer. The Battery Analyzer represents the latest technology in battery testing and will provide you quickly and safely with easy to understand, accurate results. 1. Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal. The Battery Analyzer switches on when both connections are made. 2. Ensure a good connection by moving the clamps around on the terminals. The Battery Analyzer requires that both sides of each clamp be properly connected before testing can take place. A poor connection will result in the ‘CHECK CONNECTION’ warning. If this happens, clean the battery terminals and clamps and reconnect. 3. Following the start up screens, enter the rating of the battery you are testing* (EN or CCA according to Battery Analyzer model) using the ‘▲’ and ‘▼’ buttons. The default setting is 500 EN (or 500 CCA according to model). 4. Press the TEST button and begin the battery test. 5. The result of the test is displayed on the screen. 6. If retest is required, disconnect the Battery Analyzer, reconnect it to the battery ter- minals, and repeat the process. CONNECTING THE ANALYZER TO THE BATTERY Note: Tests should only be undertaken with the vehicle engine and any electrical loads in the ‘Off’ position. IDENTIFYING YOUR BATTERY RATING Your battery should have a label attached showing its performance rating. Use this infor- mation to set the Battery Analyzer. If not visible contact your battery supplier for guidance. Battery label - typical location MANUAL

CTEK BATTERY ANALYZER INNOVATION IN BATTERY TESTING The CTEK BATTERY ANALYZER tests with high accuracy the condition of all types of 12V lead-acid batteries including Wet, Maintenance Free, Ca/Ca, Gel and AGM. Easy to use it provides fast, and easy to understand results. Operating voltage range is 8–15V with a test range of 200–1 200EN. Simply connect the clamps to the battery and follow the step by step instructions on the display. The easy to read display gives clear information on the condition of any 12V lead-acid battery and advises what action is required. With no need to disconnect the battery from the vehicle, the patented technology used by the CTEK BATTERY ANALYZER is safe for the user and vehicle electronics. It is reverse polarity protected, creates no battery loads, heat or sparks. The CTEK BATTERY ANALYZER features a 2-year warranty. TECHNICAL DATA TYPE OF ANALYZER Conductance TYPE OF BATTERY ANALYZED 12V Lead-Acid MIN.TESTING VOLTAGE 8V MAX.TESTING VOLTAGE 15V RESOLUTION 0.1V ACCURACY ± 0.1V RANGE 200–1 200EN RESOLUTION 25EN ACCURACY ± 25EN