CyberData 011097 Manuals

Quick Reference 930344E © 2014, CyberData Corporation, ALL RIGHTS RESERVED © 2014, CyberData Corporation, ALL RIGHTS RESERVED 930344E Quick Reference Connections Mounting the Enclosure Contacting CyberData 1-Sense (+) 2-GND 3-Relay COM 4-Relay NO 5-Line-In(+) 6-Line-In(-) 7-Line-Out(+) 8-Line-Out(-) 9-Spkr Out(+) 10-Spkr Out (-) CLASS II WIRING Speaker Connection Line-Out Connection Relay Connection Sensor Connection Line-In Connection To mount the enclosure: 1. Prepare holes for the screws. 2. Plug in the power adapter and use the green Power light to verify that the power is on. 3. Plug the Ethernet cable into the V2 Loudspeaker Amplifier. The yellow Link light verifies the network connection. 4. For wall mounting, use the three #6 x 1-1/4-inch Pan Head Phillip screws to secure the speaker. 071057A PHILLIP SCREW (3x) #6x1 1/4" PAN HEAD #6 PLASTIC ANCHOR (3x) 151014 531032 Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Web: http://www.cyberdata.net/support/contactsupportvoip.php RMA Dept: (831) 373-2601 ext. 136 Email: [email protected] RMA Status: http://www.cyberdata.net/support/rmastatus.html Warranty information is available at: Web: http://www.cyberdata.net/support/warranty/index.html Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 www.CyberData.net Getting Started • Download the VoIP V2 Loudspeaker Amplifier (PoE) Operations Guide PDF file from the Documents page at: http://www.cyberdata.net/products/voip/digitalanalog/loudspeakerampv2/docs.html • Create a plan for the locations of your paging amplifiers. • WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes. • WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant. • WARNING: The V2 Loudspeaker Amplifier enclosure is not rated for any AC voltages! Parts Parameter Factory Default Setting IP Addressing DHCP IP Addressa a. Default if there is not a DHCP server present. 10.10.10.10 Web Access Username admin Web Access Password admin Subnet Maska 255.0.0.0 Default Gatewaya 10.0.0.1 (1) Assembly (1) Wall Mounting Kit (3) #6 Plastic Anchors (3) #6 x 1-1/4-inch Pan Head Phillip Screws (1) Enclosure View Inside of the Enclosure The IP Endpoint Company Installation Quick Reference VoIP V2 Loudspeaker Amplifier (PoE) SIP Compliant 011097

VoIP V2 Loudspeaker Amplifier (PoE) Operations Guide Part #011097 Document Part #930362N for Firmware Version 6.5.0 CyberData Corporation 3 Justin Court Monterey, CA 93940 (831) 373-2601 The IP Endpoint Company

VoIP V2 Loudspeaker Amplifier (PoE) Operations Guide Part #011097 Document Part #930362L for Firmware Version 6.2.0 CyberData Corporation 3 Justin Court Monterey, CA 93940 (831) 373-2601 The IP Endpoint Company

VoIP V2 Loudspeaker Amplifier (PoE) Operations Guide Part #011097 Document Part #930362J for Firmware Version 6.2.0 CyberData Corporation 3 Justin Court Monterey, CA 93940 (831) 373-2601 The IP Endpoint Company

VoIP V2 Loudspeaker Amplifier (PoE) Operations Guide Part #011097 Document Part #930362G for Firmware Version 6.0.0 CyberData Corporation 3 Justin Court Monterey, CA 93940 (831) 373-2601 The IP Endpoint Company