DigiTech VTP1 Manuals

DigiTech VTP1 Owner's manual (15 pages)

• Identifier: id-226191
• Brand: DigiTech
• Device: Other
• Type: Owner's manual, PDF
• Key Aspects: Maintenance Schedule, Data Backup Instructions
• UPD Date: 17.08.2026
• Source File: 166098.pdf
• Pages: 15
• Description: Complete usage guide for the DigiTech VTP1. It outlines installation and network setup, control functions, connectivity options, adjustment procedures.

Key Pages and Contents:

• These connectors allow you to insert another processor such as a compressor or de-esser into the

  signal path. You would insert the processor into this loop to place it in the path leading to the digi- tal output of the VTP-1. Both the SEND and RETURN are balanced TRS jacks with +4 dBu no

• PHASE reversal switch

  You can invert the phase of the incoming signal. This may be required when you have two mics coming into both channels of the VTP-1 and the distance between the mics is at a critical point where they cause frequency cancellation. Flipping the phase of one of the input channels

• The VU Meter and CLIP LED

  These two components give you a combined and highly accurate reading of the amount of level at the analog and digital outputs. The VU meter is calibrated in Volume Units which give an average signal level reading. The key word here is “average” because VU meters show th

• Equivalent Input Noise:

  -127 dBu @ 150Ω Signal-to-Noise Ratio: > 102 dB, A weighted Total Harmonic Distortion + Noise: < 0.1% typical, user-variable Frequency Response: +0, -1 dB from 20 Hz to 20 kHz +0, -3 dB from 15 Hz to 40 kHz Equalization: +/- 15 dB @ 80 Hz (shelving) +/-