Digizoid ZO2 Manuals

Know your ZO Control your ZO ZO 2 Personal Subwoofer Quick Start Guide 2 Output Jack 3.5mm stereo jack connects ZO to a listening device Switch Powers on/off, triggers modes, and selects settings LightBar & Low-Battery Indicator Charge Status Indicator USB Charging Port Input Jack 3.5mm stereo jack connects ZO to an audio source 2 Push in & release switch Turn ZO On* goes into goes into 2 Sound Signature Tuning Mode Push in & release switch 2 Connection Configuration Mode Push in & release switch goes back into *To turn ZO off while in either mode, push in and hold the switch until the LightBar turns off. Turn ZO on, and enter the Connection Configuration mode. Verify that ZO is set to the correct configuration mode, depending on the type of connection used between your audio source and ZO (on first use, ZO should be set to Headphone Out mode): 2 Configure ZO’s Connection Mode This section is important - please read! ! To enter Headphone Out mode: when LightBar is purple, rotate and hold switch up for ~8 secs. LightBar will turn pink, and volume will more than double. To exit Headphone Out mode: rotate switch down. LightBar will turn purple. Dock Connector Line Out mode MAX (purple) MIN (dark blue) 32 volume levels ... ... Stereo Cable Headphone Out mode FIXED VOL (pink) Volume is controlled using ZO. Rotate the switch up/down once to change by one level. Hold rotated to scan through the levels. Start at min setting. Volume is controlled using the player. Start at 25% of full volume. Connect ZO’s USB Charging Port to a USB port on your computer using the provided charging cable. The Charge Status Indicator will light up red while the battery is charging. The indicator will turn off when the battery is fully charged (it should take about 1 hour to fully charge ZO if the battery was completely drained). If the battery gets low, a secondary red light will blink at the bottom of the LightBar. Charge your ZO 1 Quick Start If using Headphone Out mode, and ZO’s battery completely drains (i.e., turns off while in use), you will have to re-enter Headphone Out mode after ZO is recharged.