Dri-Eaz PHD 200 Manuals

07-01913C F515 2014-02 Warranty 07-01651 1 Dri-Eaz Products, Inc. Owner’s Manual PHD 200 Dehumidifier Model F515 DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233 Phone: 800-932-3030 Fax: 360-757-7950 www.EnvironmentsHQ.com The Dri-Eaz® PHD 200 Dehumidifier reduces humidity in enclosed environments by removing water vapor from the air. The PHD 200 is ideal for crawlspace drying, humidity control and other applications requiring high-performance dehumidification. (Not intended for professional water damage restoration.) Patents: http://www.LBpatents.com R E A D A N D S A V E T H E S E I N S T R U C T I O N S Read and understand manual before operating. WARNING! Do not alter or modify your PHD 200 in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unap- proved parts could create a hazard and will void your warranty. Contact your authorized Dri-Eaz dis- tributor for assistance. WARNING! Electric shock hazard, rotating fan, hot surface hazards. Unplug unit before opening cover for cleaning or servicing. WARNING! Unit must be grounded. • Keep motor and wiring dry. Keep out of standing wa- ter and do not install in area likely to be subject to water intrusion. Do not expose to rain, water or snow. • Insert three-prong plug on power cord into a match- ing electrically grounded outlet. Do not use adapter. Never cut off third prong. • Do not use an extension cord. • To reduce the risk of fire or electric shock, do not use this unit with any solid-state speed control de- vice. FIRE HAZARD • Keep away from open flames and heat sources. • Do not use or store where vapors from gasoline, sol- vents, thinners or other flammable materials may be present. WARNING! Unplug unit before cleaning or servicing. • Turn off unit and unplug before lifting or moving. • Handle the unit carefully. Always operate the unit on a stable, level surface. Do not drop, throw, or place where it could fall. Rough treatment can damage the unit, and may create a hazardous condition or void the warranty. • Inspect the power cord before use. If cord is dam- aged, do not use. Always grasp the plug (not the cord) to unplug. • The unit must be operated on a 115V/60 Hz circuit protected by a Ground Fault Circuit Interrupter (GFCI) device. • Do not attempt to repair the unit. For Authorized Service Centers, call Dri–Eaz Service at 800-932- 3030. BEFORE YOU BEGIN Warranty registration Visit warranty.drieaz.com to register your purchase. Registration allows us to better assist you with using, maintaining or servicing your equipment and to contact you in case we have important safety information con- cerning your Dri-Eaz product. If you determine service is required, have your equipment model, serial number and original proof of purchase available and call your distrib- utor for assistance with obtaining a return material au- thorization (RMA). INTRODUCTION The PHD 200 Dehumidifier reduces humidity in enclosed structures by removing water vapor from the air. With proper use, the PHD 200 can help to dry out damp struc- tural materials, insulation, and contents, and maintain a healthy level of humidity. Using the PHD 200 may also prevent secondary damage caused by high humidity. WARNING

07-01913H F515-115V 1 Dri-Eaz Products, Inc. Owner’s Manual PHD 200 Dehumidifier Model F515-115V DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233 Phone: 800-932-3030 Fax: 360-757-7950 The Dri-Eaz® PHD 200 Dehumidifier reduces humidity in enclosed environments by removing water vapor from the air. The PHD 200 is ideal for crawlspace drying, humidity control and other applications requiring high-performance dehumidification. (Not intended for professional water damage restoration.) Patents: http://www.LBpatents.com S A V E T H E S E I N S T R U C T I O N S SAFETY INSTRUCTIONS WARNING! Do not alter or modify your unit in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unap- proved parts could create a hazard and will void your warranty. Contact your authorized distributor for assistance. WARNING! Electric shock hazard, rotating fan, hot surface hazards. Unplug unit before opening cover for cleaning or servicing. Unit must be grounded.  Inspect the power cord before use. If cord is dam- aged, do not use. Always grasp the plug (not the cord) to unplug.  Insert three-prong plug on power cord into a match- ing electrically grounded outlet. Do not use adapter. Never cut off third prong. Do not use an extension cord.  The unit must be operated on a 115V/60Hz circuit protected by a Ground Fault Circuit Interrupter (GFCI) device.  Keep motor and wiring dry.  Do not attempt to repair the unit. For Authorized Service Centers, contact Dri-Eaz. BEFORE YOU BEGIN Warranty registration Visit warranty.drieaz.com to register your purchase. Registration allows us to better assist you with using, maintaining or servicing your equipment and to contact you in case we have important safety information con- cerning your Dri-Eaz product. If you determine service is required, have your equipment model, serial number and original proof of purchase available and call your distrib- utor for assistance with obtaining a return material au- thorization (RMA). INTRODUCTION The PHD 200 Dehumidifier reduces humidity in enclosed structural environments by removing water vapor from the air. With proper use, the PHD 200 can help to dry out damp structural materials, insulation, and contents, and maintain a healthy level of humidity. Using the PHD 200 may also prevent secondary damage caused by high hu- midity. WARNING CORRECT PLUG REMOVAL Grasp IEC plug and pull straight out IMPORTANT: Damage to IEC receptacle or dehu- midifier resulting from improper removal of the power cord is not covered by warranty. The IEC power cord is a wear item and is not covered by warranty.

07-01913A F515 2013-11 Warranty 07-01651 1 Dri-Eaz Products, Inc. Owner’s Manual PHD 200 Dehumidifier Model F515 DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233 Phone: 800-932-3030 Fax: 360-757-7950 http://Revo.DriEaz.com The Dri-Eaz® PHD 200 Dehumidifier reduces humidity in enclosed environments by removing water vapor from the air. The PHD 200 is ideal for water damage restoration, structural drying, construction, and many other applications requiring temporary, high-performance dehumidification. Patents: http://www.LBpatents.com R E A D A N D S A V E T H E S E I N S T R U C T I O N S Read and understand manual before operating. WARNING! Do not alter or modify your PHD 200 in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unap- proved parts could create a hazard and will void your warranty. Contact your authorized Dri-Eaz dis- tributor for assistance. WARNING! Electric shock hazard, rotating fan, hot surface hazards. Unplug unit before opening cover for cleaning or servicing. WARNING! Unit must be grounded. • Keep motor and wiring dry. Keep out of standing wa- ter and do not install in area likely to be subject to water intrusion. Do not expose to rain, water or snow. • Insert three-prong plug on power cord into a match- ing electrically grounded outlet. Do not use adapter. Never cut off third prong. • Do not use an extension cord. • To reduce the risk of fire or electric shock, do not use this unit with any solid-state speed control de- vice. FIRE HAZARD • Keep away from open flames and heat sources. • Do not use or store where vapors from gasoline, sol- vents, thinners or other flammable materials may be present. WARNING! Unplug unit before cleaning or servicing. • Turn off unit and unplug before lifting or moving. • Handle the unit carefully. Always operate the unit on a stable, level surface. Do not drop, throw, or place where it could fall. Rough treatment can damage the unit, and may create a hazardous condition or void the warranty. • Inspect the power cord before use. If cord is dam- aged, do not use. Always grasp the plug (not the cord) to unplug. • The unit must be operated on a 115V/60 Hz circuit protected by a Ground Fault Circuit Interrupter (GFCI) device. • Do not attempt to repair the unit. For Authorized Service Centers, call Dri–Eaz Service at 800-932- 3030. BEFORE YOU BEGIN Warranty registration Visit warranty.drieaz.com to register your purchase. Registration allows us to better assist you with using, maintaining or servicing your equipment and to contact you in case we have important safety information con- cerning your Dri-Eaz product. If you determine service is required, have your equipment model, serial number and original proof of purchase available and call your distrib- utor for assistance with obtaining a return material au- thorization (RMA). INTRODUCTION The PHD 200 Dehumidifier reduces humidity in enclosed structural environments by removing water vapor from the air. With proper use, the PHD 200 can help to dry out damp structural materials, insulation, and contents, and maintain a healthy level of humidity. Using the PHD 200 may also prevent secondary damage caused by high humidity. WARNING To Buy: Contact Sylvane at 800-934-9194 or visit www.sylvane.com For Product Support: Contact Dri-Eaz at 1-800-932-3030