Dri-Eaz Velo Manuals

Owner’s Manual Velo™ & Velo™ Pro Low Profile Airmover Models F504 & F505 115V DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233, USA Phone: +1 800-932-3030 Fax: +1 360-757-7950 www.dri-eaz.com The Velo Airmover produces a high rate of airflow to accelerate the evaporation of moisture from materials for restorative drying. Patents: http://www.LBpatents.com R E A D A N D S A V E T H E S E I N S T R U C T I O N S WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. WARNING! Unit must be grounded. Do not use with an extension cord. Connect only to an outlet provided with a ground fault interrupting device. WARNING! Never operate a unit with a damaged power cord, as this may lead to electrical or fire hazards. If power cord is damaged, it must be replaced by a cord of the same type and amperage rating. WARNING! Do not touch grills when unit is operating. NOTICE: Keep motor dry. For indoor use only. NOTICE: Unplug when not in use or when moving unit. NOTICE: Do not allow children to play with or around the unit. Be sure the unit is inaccessible to children when not attended. NOTICE: Always operate the unit on a stable, level surface so it cannot fall and cause injury. WARNING! Do not alter or modify your Velo in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unapproved parts could create a hazard and will void your warranty. Contact your authorized Dri-Eaz distributor for assistance. WARNING! a) Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair. b) Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. BEFORE YOU BEGIN Warranty registration Please visit warranty.drieaz.com to register your purchase. Registration allows us to better assist you with using, maintaining Fig. B: Operating Positions Horizontal (for horizontal surfaces) Vertical (for walls and ceilings) Right edge (for wall drying) Left edge (for wall drying) With stand for stairwells and wall drying (Pro model only) Rear cord wrap under bottom edge. Wrap cord counter-clockwise and secure with plug clip. Pro: Variable speed control with amp readout Stand folds out and locks (Pro only). Inlet grill. Keep clear of obstructions. Outlet grill. Keep clear of obstructions. Velo: On/Off and circuit breaker reset switches GFCI-protected power outlet sockets with reset switch. Carry strap Fig. A: Parts Identification Front Lift/Cord Wrap tab. Wrap cord counter- clockwise and secure with plug clip. 07-01837E F504/F505-115V 1 Dri-Eaz Products, Inc.

07-01851E F504-230V, F505-230V 1 Dri-Eaz Products, Inc. Owner’s Manual Velo™ & Velo™ Pro Low Profile Airmover Models F504-230V & F505-230V DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233, USA Phone: +1 360-757-7776 Fax: +1 360-757-7950 www.dri-eaz.com The Velo Airmover produces a high rate of airflow to accelerate the evaporation of moisture from materials for restorative drying. Patents: http://www.LBpatents.com O R I G I N A L I N S T R U C T I O N S WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. WARNING! Unit must be grounded. Do not use with an extension cord. Connect only to an outlet provided with a ground fault interrupting device. WARNING! Never operate a unit with a damaged power cord, as this may lead to electrical or fire hazards. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. If power cord is damaged, it must be replaced by a cord of the same type and amperage rating. WARNING! Do not touch grills when unit is operating. NOTICE: Keep motor dry. For indoor use only. NOTICE: Unplug when not in use or when moving unit. NOTICE: Do not allow children to play with or around the unit. Be sure the unit is inaccessible to children when not attended. NOTICE: Always operate the unit on a stable, level surface so it cannot fall and cause injury. WARNING! Do not alter or modify your Velo in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unauthorized parts could create a hazard and will void your warranty. Contact your authorized Dri-Eaz. distributor for assistance. WARNING! This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazard involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Fig. B: Operating Positions Identification Horizontal (for horizontal surfaces) Vertical (for walls and ceilings) Right edge (for wall drying) Left edge (for wall drying) Pro only: Kickstand. Rear cord wrap under bottom edge. Wrap cord clockwise. Pro only: KWH meter. Inlet grill. Keep clear of obstructions. Outlet grill. Keep clear of obstructions. On/Off switch. Carry strap Fig. A: Parts Identification Front Lift/Cord Wrap tab. Wrap cord clockwise and secure with hook-and- loop tie.

07-01837G F504/F505 115V 1 Legend Brands, Inc. Owner’s Manual Velo® & Velo® Pro Low Profile Airmover Models F504 & F505 115V LEGEND BRANDS, INC. 15180 Josh Wilson Road, Burlington, WA 98233, USA Phone: +1 800-932-3030 Fax: +1 360-757-7950 LegendBrandsRestoration.com The Velo Airmover uses a patented housing design to produce concentrated, broad-path airflow to accelerate the evaporation of moisture from materials for drying. Patents: http://www.LBpatents.com R E A D A N D S A V E T H E S E I N S T R U C T I O N S WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. WARNING! Unit must be grounded. Do not use with an extension cord. Connect only to an outlet provided with a ground fault interrupting device. WARNING! Never operate a unit with a damaged power cord, as this may lead to electrical or fire hazards. If power cord is damaged, it must be replaced by a cord of the same type and amperage rating. WARNING! Do not touch grills when unit is operating. WARNING! Do not allow children to play with or around the unit. Be sure the unit is inaccessible to children when not attended. WARNING! Always operate the unit on a stable, level surface so it cannot fall and cause injury. WARNING! Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair. WARNING! Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area to avoid creating a trip hazard. NOTICE: Keep motor dry. For indoor use only. NOTICE: Unplug when not in use or when moving unit. NOTICE: Do not alter or modify your Velo in any way. Use only replacement parts authorized by Legend Brands, Inc. Modifications or use of unapproved parts could create a hazard and will void your warranty. Contact your authorized Dri-Eaz distributor for assistance. Fig. B: Operating Positions Horizontal (for horizontal surfaces) Vertical (for walls and ceilings) Right edge (for wall drying) Left edge (for wall drying) With stand for stairwells and wall drying (Pro only) Rear cord wrap under bottom edge. Wrap cord in either direction and secure with plug clip. Variable speed control with amp readout (Pro only). Stand folds out and locks (Pro only). Inlet grill. Keep clear of obstructions. Outlet grill. Keep clear of obstructions. Velo: On/Off and circuit breaker reset switches. GFCI-protected power outlet sockets with reset switch. Carry strap Fig. A: Parts Identification Front Lift/Cord Wrap tab. Wrap cord in either direction and secure with plug clip.

07-01837A F504/F505-115V 2013-03 Warranty 07-00419 1 Dri-Eaz Products, Inc. Owner’s Manual Velo™ Low Profile Airmover Velo™ Pro Low Profile Airmover Model F504-115V, F505-115V DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233, USA Phone: +1 800-932-3030 Fax: +1 360-757-7950 www.dri-eaz.com The Velo Airmover produces a high rate of airflow to accelerate the evaporation of moisture from materials for restorative drying. Patents: http://www.LBpatents.com R E A D A N D S A V E T H E S E I N S T R U C T I O N S WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. WARNING! Unit must be grounded. Do not use with an extension cord. Connect only to an outlet provided with a GFCI device. WARNING! Never operate a unit with a damaged power cord, as this may lead to electrical or fire hazards. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING! Do not touch grills when unit is operating. WARNING! Do not alter or modify your Velo in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unapproved parts could create a hazard and will void your warranty. Contact your authorized Dri-Eaz distributor for assistance. NOTICE: Keep motor dry. For indoor use only. NOTICE: Unplug when not in use or when moving unit. NOTICE: Do not allow children to play with or around the unit. Be sure the unit is inaccessible to children when not attended. NOTICE: Always operate the unit on a stable, level surface so it cannot fall and cause damage or injury. PRODUCT FEATURES Velo (F504) Velo Pro (F505) Operating speed(s) 1 Variable Operating positions 4 5 (with stand) Fold-out stand ● Carry handle ● ● Stackable for storage ● ● BEFORE YOU BEGIN Warranty registration Please visit warranty.drieaz.com to register your purchase. Registration allows us to better assist you with using, maintaining or servicing your equipment and to contact you in case we have important safety information concerning your Dri-Eaz product. If you determine service is required, have your equipment model, serial number and original proof of purchase available and call your distributor for assistance with obtaining a return material authorization (RMA). OPERATING INSTRUCTIONS Note that the Velo can be placed in a variety of positions for drying and air circulation. See Fig. B for details. 1. Unwrap the cord and plug the unit into a standard 115V GFCI-protected outlet. CAUTION: Be sure switch is in the off position before connecting unit to power outlet. 2. Aim the Velo outlet toward the surface to be dried. Rear cord wrap under bottom edge. Wrap cord clockwise and secure with plug clip. On/Off switch. (Variable speed on F505 only) Stand folds out and locks (F505 model only.) Inlet grill. Keep clear of obstructions. Outlet grill. Keep clear of obstructions. Circuit breaker reset switch GFCI-protected power outlet sockets with reset switch. Carry strap Fig. A: Parts Identification Front Lift/Cord Wrap tab. Wrap cord clockwise and secure with plug clip.

07-01844A F504/F505-230V 2013-10 Warranty 07-00427 1 Dri-Eaz Products, Ltd. Owner’s Manual Velo™ & Velo™ Pro Low Profile Airmover Models F504-230V & F505-230V DRI-EAZ PRODUCTS, LTD. 22 Plover Close, Interchange Park, Newport Pagnell, MK16 9PS Tel: +44 (0)1908-611-211 Fax: +44 (0)1908-611-363 www.dri-eaz.co.uk The Velo Airmover produces a high rate of airflow to accelerate the evaporation of moisture from materials for restorative drying. Patents: http://www.LBpatents.com O R I G I N A L I N S T R U C T I O N S WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. WARNING! Unit must be grounded. Do not use with an extension cord. Connect only to an outlet provided with a ground fault interrupting device. WARNING! Never operate a unit with a damaged power cord, as this may lead to electrical or fire hazards. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. If power cord is damaged, it must be replaced by a cord of the same type and amperage rating. WARNING! Do not touch grills when unit is operating. NOTICE: Keep motor dry. For indoor use only. NOTICE: Unplug when not in use or when moving unit. NOTICE: Do not allow children to play with or around the unit. Be sure the unit is inaccessible to children when not attended. NOTICE: Always operate the unit on a stable, level surface so it cannot fall and cause injury. WARNING! Do not alter or modify your Velo in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of unauthorised parts could create a hazard and will void your warranty. Contact your authorised Dri-Eaz Ltd. distributor for assistance. This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazard involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Fig. B: Operating Positions Horizontal (for horizontal surfaces) Vertical (for walls and ceilings) Right edge (for wall drying) Left edge (for wall drying) Pro only: Kickstand. Rear cord wrap under bottom edge. Wrap cord clockwise. Pro only: KWH meter. Inlet grill. Keep clear of obstructions. Outlet grill. Keep clear of obstructions. On/Off switch. Carry strap Fig. A: Parts Identification Front Lift/Cord Wrap tab. Wrap cord clockwise and secure with hook-and- loop tie.