dynabug 57800 Manuals

Safety, Operation and Maintenance – Save This Document and Educate All Personnel Parts Page Reorder No. PD13•11 Effective March, 2013 Supersedes PD09•53T WARNING Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute (ANSI). Safety Requirements for the Use, Care and Protection of Abrasive Wheels – ANSI B7.1, Compressed Air and Gas Institute (CAGI) Safety Code for Portable Air Tools – CAGI B186.1, Code of Federal Regulation – CFR 29 Part 1910, International Organization for Standardization (ISO) Hand Held Non-Electric Power Tools – ISO 11148, Safety Requirements and applicable State and Local Regulations. Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com Read and understand tool manual before work starts to reduce risk of injury to operator, visitors, and tool. Ear protection to be worn when exposure to sound, exceeds the limits of applicable Federal, State or local statues, ordinances and/or regulations. Practice safety requirements. Work alert, have proper attire, and do not operate tools under the influence of alcohol or drugs. Air line hazard, pressurized supply lines and flexible hoses can cause serious injury. Do not use damaged, frayed or deteriorated air hoses and fittings. Eye protection must be worn at all times, eye protection to conform to ANSI Z87.1. Respiratory protection to be used when exposed to contaminants that exceed the applicable threshold limit values required by law. Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement and other masonry products • Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. DO NOT USE Tool for Anything Other Than Its Intended Applications. Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident. Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories. Report to Your Supervisor any Condition of the Tool, Accessories or Operation you Consider Unsafe. Tool Intent: Dynabug® sanders are used for sanding and finishing a variety of materials including wood, metal, plastic, fiberglass, solid surfaces, composites, rubber, glass and stone. SAFETY and OPERATING INSTRUCTIONS Carefully Read and Understand the General and Sander sections found in Tool Safety and Operating Guidelines (PN00001676) Before Handling or Using Tool. Carefully Read all instructions before operating or servicing any Dynabrade® Abrasive Power Tool. Products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design. Model RPM Vacuum Orbit Pad Size Pad Type 57800 8,000 Non-Vacuum 3/16" 3-2/3" x 7" Vinyl-Face 57801 8,000 Self-Generated 3/16" 3-2/3" x 7" Vinyl-Face 57804 8,000 Central Vacuum 3/16" 3-2/3" x 7" Vinyl-Face 57810 10,000 Non-Vacuum 3/32" 3-2/3" x 7" Vinyl-Face 57811 10,000 Self-Generated 3/32" 3-2/3" x 7" Vinyl-Face 57814 10,000 Central Vacuum 3/32" 3-2/3" x 7" Vinyl-Face SANDER ® Model 57800 Dynabug Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade