Edelbrock 17935 Manuals

Edelbrock 17935 Installation instructions (4 pages)

• Identifier: id-234674
• Brand: Edelbrock
• Device: Automobile Parts
• Type: Installation instructions, PDF
• Key Aspects: Safety Recommendations, User Training Recommendations, Device Safety Standards
• UPD Date: 01.06.2026
• Source File: 175980.pdf
• Pages: 4
• Description: Maintenance instructions for the Edelbrock 17935. The guide provides instructions on service procedures, performance details, operational safety.

Key Pages and Contents:

• Page 2 of 4

  ©2003 Edelbrock Corporation Rev. 11/03 (Note: This rotary fuel injection pump will not work on carbureted fuel systems. It is for electronic fuel injection only.) (Note: The word “bracket” used throughout these instructions refers to the fuel pump

• Page 3 of 4

  ©2003 Edelbrock Corporation Rev. 11/03 BRACKET REMOVAL 1. Thoroughly clean all dirt and debris from the top of the tank. Clean out any dirt from around the locking ring and retainer. This must be done to prevent dirt of foreign material from falling in

• Page 1 of 4

  ©2003 Edelbrock Corporation Rev. 11/03 255 Liter/Hr, High Pressure In Tank Fuel Pump For 1985-1997 Ford Mustang (Except for 1996-1997 Cobra) Catalog # 17935 INSTALLATION INSTRUCTIONS • PLEASE study these instructions carefully before installing your ne

• Page 4 of 4

  ©2003 Edelbrock Corporation Rev. 11/03 FUEL TANK INSTALLATION 1. Inspect the condition and location of all tank mounting pads, insulators and brackets. Defective, missing or mislocated pads and insulators will cause the transmission of excessive noise i