Eeyelog E730 Manuals

USER MANUAL Dashboard Camera Illustration 1) Menu 2) Mode 3) UP/MIC 4) Down/EV 5) Left / LED Button 6) Right 7) Power Button A. To power it on, press the button once, press it again to turn off the display (this will NOT power it off) B. To power off the dash camera, hold the press for 3s 8) Record / Snapshot / Confirm 9) GPS 10) Red Indicator (Charging) 11) Blue Indicator (Recording) 12) Green Indicator (GPS) – Extra GPS Module Required 13) Lens 14) LED Light (Night Vision) 15) USB Port 16) HDMI Output 17) Reset 18) Micro SD Card Slot 19) DC IN (Where you connect your car charger) Interface Illustration 1) Movie Camera Icon: Indicating camera is in Recording Mode 2) Battery: Indicating the remaining power for the device, charge your camera when the power is low 3) Micro SD Card: When the card is properly inserted, it shows up. Otherwise it will be a “X” 4) G-Sensor: The higher the blue color stands, the more sensitive 5) Motion Detection: This icon shows up only when it is enabled 6) Lock: This Icon shows up when collision/vibration occurs and followed by device mandatory file protection (see G- Sensor) 7) Microphone: It only shows up in Recording Mode, press the “Left/MIC” button to turn it On/Off 8) GPS: External GPS Module required for GPS option 9) HDR: When resolution is set to 1920x1080@30P HDR, it appears. 10) Speed Limit: Preset speed limit (GPS Module required) 11) ADAS: Only appears when it is enabled 12) LED: On/Off 13) EV: Exposure Value, “+” means brighter, “-“ means dimmer 14) Video Resolution 15) Loop Recording: 3 Minutes (for the current setting) Installation: 1) Shut vehicle engine off. 2) With Power Off, insert the Micro SD Card (not provided) into the card slot. 3) Affix the DVR mounting frame (the suction cup) to the windshield (clean the windshield before placing mounting frame). Check the FAQ to see where you should affix the mounting. Adjust camera position to ensure it is not blocking driver’s view. 4) Connect the car charger to “DC IN”, start the engine, check if DVR Dash Camera has been installed correctly. (If DVR Dash Camera has been installed correctly, device will enter video recording mode automatically when engine starts.) Accessing Files via a PC: 1) Connect the DVR to a PC with the included USB cable via “USB Port” (NOT “DC IN”) 2) The “Removable disk” icon will appear on the computer’s taskbar 3) The recorded files will be stored similar the contents of a flash drive Accessing Files via TV: 1) Connect the DVR to TV with a HDMI cable (NOT INCLUDED), make sure your DVR is power on 2) On your TV you should see the same screen as the one on your car DVR 3) Go to Preview Mode (Stated Below) and choose your desired file Operating Instructions RECORDING MODE To enter the recording mode, you should insert the Micro SD Card to the device, power it on by wiring a USB cable to “DC IN” port, and it will automatically enter recording mode. You will see a “Red Blinking icon” as well as a “Movie Camera icon” when it is in recording mode. If the DVR is in recording mode (red blinking icon on), Stop the recording by shortly pressing the “Record / Snapshot / Confirm” button, then press the “Menu” button to enter the menu. (Press the up/down buttons (MIC/EV) for moving in menus; press Left/Right to navigate between “Record Setting” and “System Setting”. Press the “Record / Snapshot / Confirm” button to confirm/select) Video Resolution: [2560x1080@30P 21:9, 2304x1296@30P 16:9, 1920x1080@30P 16:9, HDR 1920x1080@30P 16:9, 1280x720@30P 16:9] Image Quality: [Super Fine, Fine, Normal] Meter Mode Setting: [Center-weighted average metering, Spot metering, and Average metering] Anti-Flicker: [Auto / 50Hz / 60Hz]. Choose the correct frequency for the power line to avoid flickering Stamp Setting: [On / Off], When it is ON, date/time/plate number (preset) will appear on the recording files ADAS Detect: [On / Off] for Advanced Driver Assistance Systems. See below: A: Lane-Departure-Warning-System (LDWS): If lane-changing occurs, warning picture will appear to warn the driver B: Low-Light-Warning-System, it will remind you to turn on the headlight if you drive in low-light condition C: Driver-Fatigue-Warning-System, device will send a warning picture and warning tone to the driver when continuous driving (more than 4 hours) is detected, followed by the same every two hours. Record Time: This provides [1min/3min/5min] Loop Setting Time Zone: Set the time zone for different country. AE Bias: EV Settings, to make the footage or snapshot brighter or dimmer Speed Warning Setting: [Off/80KMH/120KMH] - External GPS module is required for such function LED Setting: [On/Off] - Turn on and off the LED in front of the Dash Camera G Sensor Setting: [Off/Low/Medium/High] - This refers to the sensitivity. Under G-Sensor mode, when an impact is detected the footage will be saved anyways Motion Detection: [On/Off] - Under Motion Detection mode, the Dash Camera records automatically when it senses movement Language Setting: English, Russian, Simplified Chinese, Traditional Chinese Record Mode Setting: Auto Record (when powered on), Manual Record System Mode: NTSC/PAL Driver ID Setting: Set up the plate number for the car Time Setup: Set up the date and time display for the recording Format: Format your memory card Default Setting: This is used to load the default settings Back Light Off Setting: Device will automatically turn off the display after certain amount of time, also called screen saver Delay Power Off: Device will automatically power off (when you unplug the power supply) after certain amount of time Beep Sound Setting: On/Off. Turn on/off the sound Version Info: Firmware version of the device PHOTOGRAPHIC MODE To enter photographic mode, shortly press “Mode” button. If the DVR is in Recording Mode (with a red blinking icon), you need to stop the recording by shortly pressing the “Record / Snapshot / Confirm” button, then shortly press the “Modes” button again. In the upper left corner of the display, notice that the “Movie Camera icon” has changed into an icon of a “Picture Camera”. Shortly press “Record / Snapshot / Confirm” button to take a photo. Go to the menu for Photographic Mode by shortly pressing the “Menu” button. Photo Resolution: 4M (2688x1512 16:9) or 9M (4000x2250 16:9) or 13M (4800x2700 16:9) Image Quality: Super Fine, Fine, Normal Stamp Setting: On/Off. Whether or not the snapshot will come with Date/Time/Plate Number or not PREVIEW MODE To enter the Preview Mode, shortly press the “Mode” button when you are in the “Photographic Mode”. Go to the menu for Preview Mode by shortly pressing the “Menu” button” Play Mode Setting: [Play One, Play All, Repeat One, Repeat All] Delete File: Delete the selected file

USER MANUAL CAR BLACK BOX E730 Instructions before use This user manual will describe the usage of this product in details and at the same time provide comprehensive information including usage, operation, installation instructions and specification, etc. Please read the manual carefully and keep it properly. We hope our product will satisfy your need and provide you with longterm services. Product Guarantee This product is approved by ISO9001:2000 International Quality Standard and certified with FCC, CE and SGS. Our customers can use this product free of apprehension. Copyright infringement Warning Please note this product is for personal use only. The forms of usage should not offend or infringe international or domestic copyright laws and regulations. All recorded videos should be for personal use only. Please note that using this product for recording of occasions like shows, exhibitions or commercial activities will infringe others' copyrights or legislation rights. Check Product Accessories Please check whether the following accessories are present before use, 1. Vehicle Power Cable (4M) x1 2. Holder x1 3. USB Cable x1 4. User Manual x1 5. Holder Coverx2 Product Structure 1.Menu/Emergency Button 2.Mode 3.UP/Mute 4.Down/EV 5..Left/LED on/off Button 6.Right / Button 7.Power On/Off ; Short Press Power On/Off ; Long Press Forced Power Off Button 8.Record / Photo / OK 9.GPS 10.Red Light Indicator (Charging) 11.Blue Light Indicator(Recording) 12.Green Light Indicator (GPS)Optiona 13.Lens 14.fill light] 15.USB Port/AV Output 16.HDMI Output 17.Car DV 18.TF Card Slot Installation Warning:Must use C6 or higher specification TF card (micro SD card) Removing the Stand - hand pinch bracket exit slot can be directly (without moving any snaps). Bracket rotation angle adjustment If the recording position is not appropriate , it can be adjusted up and down or left and down or left and right. Up and down rotation: first , loosen the nut, adjust up and down to the appropriate angle(the maximum is 180 ), and then tighten the nut Optional accessories mounting and removing CPL installation and removing Put the CPL to the Lens and move clockwise to install Turn CPL anti clockwise to remove Transmit the video to LCD TV You can also transmit the video from the drive recorder to your LCDTV at home to playback the data or adjust the setting. The steps areas follows: 1. Your video equipment should have AV IN or HDMI ports. 2. Connect AV cable or HDMI cable (optional purchase) to the video equipment and the drive recorder. Please format your TF card before use. The fixed plate and the machine installation Install the fixed plate in the appropriate location of your car, then left aligned with the slot to install. Left and right rotation:when adjust left and right angle, you can rotate the angle of the device directly(the maximum angle is 200) GPS/wifi module installation and removing CPL Module Inster the GPS/WIFI module to the port Pull the GPS/WiFi module from the port Fixed plate 3. Connect the home use transformer (optional purchase) to the drive recorder and the house power socket. 4. Adjust the channel of the video equipment to AV or HDMI. 5. Installation completed. Photo size Photos resolution can be configured during capture. Higher value means higher resolution and better picture quality. MENU Button Menu【Photo size】【3M(2048X1536)】【5M(2592X1944)】【8M(3264X2488)】 Menu Operation Press "Menu" Button active the Menu selection, "OK " button Enter sub-menu and confirm the selection left and right or up and down button to select the item . Video Clip Mode: Resolution Video resolution can be configured during recording. Higher value means higher resolution and better picture quality, and the storage capacity consumption will be relatively higher.FPS is Frame Per Second during recording. Higher FPS means smoother video. MENU Button 【Video resolution】【1920x1080 30P】【1280x720 60P】 【1280x720 30P】【640x480 30P】 Date Stamp Through this function, you can select whether to show time and License plate number and GPS rate information during recording.. MENU Button 【Stamp】【On】/【Off】 Record Time Setting Recycle record can, under limited memory card, repeatedly use the new data to overwrite the old data, in order to achieve non- interrupted recording result.MENU Button【Record Time】【2 minute】/【5 minutes】/【10 minutes】/【NO】 *Setting Value. It means saving data every 5 minutes, relatively each cycle will overwrite 5 minutes of old data. Motion detect In the view range , if there is any object move, it is detected and trig the car dv begin to record automatically. MENU Button【Motion detect】【Off】【5s】【10s】【30s】【60s】 G-Sensor When there is a collision, with the help of the changes in XYZ curves, G Sensor or Gravity Sensor can determine the direction of the collision and simultaneously set the recorded data to protection mode, and the data will not be overwritten by circulated recording. Adjust the sensitivity parameter of XYZ axles. so the drive recorder will not automatically set the data to protection mode. MENU Button【G-Sensor】【High】【Normal】【Low】【Off】 Contrast Use to record and take photo, the measurement of different brightness level between the brightness light and the darkness dark in area of light & Dark The more the scope, the more the contrast, and vise versa MENU Button【Contrast】【Normal】/【Hard】/【Soft】 Sharpness Use to adjust the image sharpness. when not enough, it can be adjusted more clearer MENU Button【Sharpness】【Standard】/【Hard】/【Soft】 Brightness Adjust the brightness of view when record and take photo, MENU Button【Brightness】【Normal】/【High】/【Low】 Saturation Use to adjust purity of bright degree or color of image, the bigger the color composition, the bigger the saturation, the smaller decolorization