Electro-Voice REV Manuals

design | performance
intelligent wireless for extremely demanding applications
aza,
00051
677

Op er at ing In struc tions
UHF WIRE LESS
MI CRO PHONE SYSTEM
User Guide

Key Features
• 950 Possible frequencies in 24MHz
operating band
• Optimized audio path to provide true wired
microphone sound
• Rugged machined aluminum handheld
transmitter with interchangeable
microphone elements
• Cast magnesium bodypack transmitter is
extremely light and durable.
• 5mW or 50mW transmit power on every
transmitter
• REV-Link PC software monitoring and
control of the receivers
• Advanced ClearScan™ scans for the
clearest channel and group of channels
General Description
The RE-V Wireless Microphone system combines frequency agility and
ease of use like no other. The RE-V transmitters and receivers operate over
a 24 MHz bandwidth in the UHF portion of the spectrum.  The high quality
audio circuitry and advanced Radio Frequency (RF) signal processing offer
broadcast quality signal-to-noise and audio clarity.
By combining four different frequency bands up to 44 simultaneous
systems can work together on one stage.  Advanced Clearscan™ scans all
available channels and displays a sorted list of the best coordinated groups
of channels.  The scanning continues and sorts for the clearest channels in
the coordinated group giving the user the best possible channel for their
location.
The entire audio path has been optimized to provide the truest
representation of a wired microphone sound possible in a wireless system.
The Electro-Voice exclusive guitar audio optimization in the bodypack
transmitter and the receiver combine to give that “wired” sound back to the
bassist and guitarist.  The guitar setting lowers the low end response down
to 30Hz, pads the input, and changes the audio for the best response
possible from a wireless.
The all new REV-H concert handheld transmitter is about the size and
shape of a wired microphone to encourage proper microphone technique
and uninhibited performances.  An alternative REV-PH presentation
handheld includes a user accessible on/off/mute switch and another
lightweight, small handheld.
The Single and Dual receivers are full 19” rack mount units with integrated
mounting hardware and IEC universal power supplies.  The REV-D
features antenna pass through that allows 6 channels of receive to be
connected to two antennas with just the cables that come with the units.
Both units have parallel RJ45 jacks that allow the connection of CAN bus
monitoring and control with a PC through the UCC-1 USB to CAN
converter.
REV
UHF Wireless
Microphone System
R

UHF WIRELESS
MICROPHONE SYSTEM
User Guide
Operating Instructions