Eterna B18WSS Manuals

If you experience problems: If your light is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to give specific instructions regarding individual installations. If in doubt, consult a qualified electrician. Help line: Tel: 01933 673 144 Fax: 01933 678 083 Email: [email protected] For answers to frequently asked questions ( FAQs ) and other information visit our web-site www.eterna-lighting.co.uk Lamp replacement: > Switch off the electricity at the mains. > Remove the diffuser etc., see diagram inside. Take care not to lose the small “O” ring seals fitted to the screws. > Remove and replace lamp. Note, the lamp pulls directly out of the lampholder, do not twist. > Replace the diffuser and trim ( if fitted ). Ensure that that all seals and gaskets are correctly positioned. Replacement lamp type: Wattage: 18 W Supply Voltage: 240 V Type: G24q base CFL—4 pin Cleaning: > Disconnect the power and clean the exterior only of this fitting with a moist ( not wet ) cloth. > The diffuser may be removed and washed in a mild detergent solution. Make sure it is completely dry before putting it back on your light fitting. > Do not use any chemical or abrasive cleaners. Eventually, you may want to replace this light fitting: When your light fitting comes to the end of it’s life or you choose to update or upgrade it by replacing it, please do not dispose of it with your normal household waste, please recycle where facilities exist. When you need to dispose of this fitting, check with your retailer or local authority for suitable options. New regulations require the recycling of Waste from Electrical and Electronic Equipment ( European “WEEE Directive” effective August 2005—UK WEEE Regulations effective 2nd January 2007 ). PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING YOUR NEW FITTING - - PLEASE RETAIN FOR FUTURE REFERENCE Low energy bricklight Model(s) B18WSS Pack contents: Bricklight fitting c/w trim 1 Cable gland 2 Screws 4 Plastic wall plugs 4 4 pin CFL 1