FLIR FXAD01 Manuals

S T E P O N E S T E P T H R E E S U G G E S T E D I N S TA L L AT I O N AT TA C H C A M E R A T O M O U N T AT TA C H M O U N T T O W I N D S C R E E N C O N N E C T C A R C H A R G E R © 2014, FLIR Systems, Inc. FXAD01_QSG_EN_FR_R1 F L I R . C O M / F X F I N D H E L P AT F L I R . C O M / F X i Q U I C K S TA R T G U I D E GET TO KNOW YOUR S T E P T W O PL ACE SUCTION CUP ON W INDSCREEN A ND PRE SS DOW N ON LE V ER TO LOCK SUCTION CUP LIF T LE V ER TO UNLOCK SUCTION CUP SLIDE CA MER A ONTO MOUNT A LL THE WAY CONNECT USB CA BLE TO CA MER A CONNECT USB CA BLE TO CA R CH A RGER A ND CONNECT CA R CH A RGER TO CIGA RE T TE LIGHTER D A S H M O U N T R E C O R D I N G 1 2 3 4 5 8 9 11 12 10 13 4 6 7 1 2 3 4 5 8 9 11 12 10 13 4 6 7 1 2 3 4 5 8 9 11 12 10 13 4 6 7 1 2 3 4 5 8 9 11 12 10 13 4 6 7 1. Suction Cup 2. Lock: Screw counterclockwise to unlock ball and socket adjustment or clockwise to lock. 3. Ball and Socket 4. Accessory Connector: Attach camera all the way to enable car recording mode. 5. Microphone: Records audio. 6. Speaker: Not used in car recording mode. 7. Record Button: Flashes red to indicate normal car recording in progress. Flashes orange and red to indicate emergency recording. Press Record Button to activate emergency recording. 8. microUSB: Camera will automatically turn on when it detects USB power while on dash mount. It is recommended to keep the camera plugged in at all times during car recording mode. 9. MicroSD: 8GB to 64GB microSD card with at least 3GB free required for car recording mode. Class 10 card required. 10. Suction Cup Lever: Pull up to unlock suction cup and push down to lock suction cup. 11. Power Button: Press to power on, hold to power off. 12. Wi-Fi Button: Wi-Fi is disabled by default when camera is attached to dash mount. Press and hold for 5 seconds to turn Wi-Fi on or off. NOTE: Car recording is disabled when Wi-Fi is turned on. 13. Direct Mode/Cloud Mode LED: Direct Mode and Cloud Mode are disabled when the camera is attached to the dash mount. NOTE: Car recordings are not saved to FLIR Cloud. 8GB to 64GB microSD (class 10) card must be inserted in the camera to use car recording. Camera will beep if no microSD card is installed or if microSD has less than 3GB free. 1. Normal Car Recording: • Camera will turn on automatically when it is on dash mount and USB power is detected (for example, when you start your car). • Camera will record at all times when it is on the dash mount and turned on. The Record Button will flash red during normal car recording. • The camera will reserve up to 40% of the total space on the microSD card for normal car recording. When this space is full, the camera will continue recording by overwriting the oldest videos first. • The camera will stop recording if the camera is removed from the dash mount, runs out of batteries, or is manually powered off by pressing and holding the power button. 2. Emergency Recording: • Emergency recording is activated if the accelerometer detects a strong G force (such as from hard braking or an accident). The Record button will flash red and orange during Emergency Recording. • You can manually activate emergency recording by pressing the Record Button. • Emergency recording will pre-record 10 seconds before the event occurs and then record 40 seconds after. • Emergency Recording files will remain on the microSD card until you manually delete them. 3. Viewing Recordings: • To view the recordings on a PC or Mac, connect the microSD card to the computer or connect the camera to the computer with the USB cable and no stand attached. • Car recordings are saved to the CAR folder on the microSD card, and Emergency recordings are saved to the EVENT folder. FXAD01_QSG_EN_FR.indd 1-2 12/12/2014 1:44:04 PM