Fluidwell F040-U Manuals

Fluidwell F040-U Manual  (32 pages)

• Identifier: id-2203307
• Brand: Fluidwell
• Device: Measuring Instruments
• Type: Manual , PDF
• Key Aspects: Accessories and Add-Ons Overview, Technical Support Procedures
• UPD Date: 16.06.2026
• Source File: 2084325.pdf
• Pages: 32
• Description: Maintenance and service manual for the Fluidwell F040-U. The document contains safety, system parameters, backup procedures, security instructions.

Key Pages and Contents:

• REMARKS: TERMINAL CONNECTORS:

  Terminals 1-2; Sensor input type U - 0-10V: The F040-U requires a 0-10V sensor signal which will be processed 4 times a second with a 16 bits accuracy. The input is not isolated. The screen of the signal wire must be connected

• To change or select a value:

  To change a value, use  to select the digits and  to increase that value. If the new value is invalid, the increase sign or decrease-sign will be displayed while you are programming. To select a setting, is used

• 2 - DISPLAY

  BARGRAPH 21 The bar graph (pie graph) displayed at operator level is percentage-wise related to the input signal: minimum signal is 0% (setup 43) and maximum signal is 100% (setup 44). With this function, the bar graph can be enabled / disable

• INTRINSICALLY SAFE APPLICATIONS

  5.1. GENERAL INFORMATION AND INSTRUCTIONS:  Mounting, electrical installation, start-up and maintenance of this device may only be carried out by trained personnel authorized by the operator of the facility. Personnel

Fluidwell F040-U Manual  (36 pages)

• Identifier: id-1616737
• Brand: Fluidwell
• Device: Laser Level
• Type: Manual , PDF
• Key Aspects: Instructions for Connecting Additional Modules, Power Management Guidelines
• UPD Date: 20.07.2026
• Source File: 1613586.pdf
• Pages: 36
• Description: Comprehensive setup guide for the Fluidwell F040-U. It explains maintenance and usage tips, supported accessories, service instructions, troubleshooting.

Key Pages and Contents:

• In this appendix, several problems are included that can occur when the F070-A is going to be

  installed or while it is in operation. Level / height displays "0 / zero" while a higher signal is available: Check:  SETUP 13 is

•  Mounting, electrical installation, start-up and maintenance of the instrument may only

  be carried out by trained personnel authorized by the operator of the facility. Personnel must read and understand this Opera

• To change or select a value:

  To change a value, use  to select the digits and  to increase that value. If the new value is invalid, the increase sign or decrease-sign will be displayed while you are programming. To select a setting, is used

• REMARKS: TERMINAL CONNECTORS:

  Terminal GND- 01- 02 POWER SUPPLY only available with option PF or PM: OPTION SENSOR SUPPLY Terminal GND 01 02 PF 24V AC ± 10% 8.2, 12, 24V max. 400mA@24V DC AC AC PF 24V DC ± 10% 8.2, 12, 24V max. 400mA@24V DC L- L+ PM 11