Fluidwell F132-P Manuals

Fluidwell F132-P Operation manual (40 pages)

• Identifier: id-1592086
• Brand: Fluidwell
• Device: Controller
• Type: Operation manual, PDF
• Key Aspects: Technical Support Contact Information, Error Code Reference, System Recovery Procedures
• UPD Date: 25.06.2026
• Source File: 1588628.pdf
• Pages: 40
• Description: Professional user manual for the Fluidwell F132-P. This guide includes detailed instructions for usage procedures, replacement parts, system parameters.

Key Pages and Contents:

• Terminal 03-04; control output R2:

  This output is available to control the batch process in two-step control mode. Terminal 05-06; control output R1: This output is available to control the batch process. Relay 1 is switched-on during the whole batch process. Type OA: : An

• ABOUT THE OPERATION MANUAL

  This operation manual is divided into two main sections:  The daily use of the unit is described in chapter 2 "Operation". These instructions are meant for users.  The following chapters and appendices are exclusively meant for electricians/t

• CONFIGURATION EXAMPLES INTRINSICALLY SAFE APPLICATIONS

  Fig. 16: Configuration example 1 Intrinsically Safe. TERMINAL CONNECTORS F100-series HAZARDOUS AREA 3 4 Common ground RXD Common ground TXD 28 26 29 5 6 Common ground 9 10 11 Common ground Signal Supply * Circuit

• 6 - FLOWMETER

  SIGNAL 61 The F132-P is able to handle several types of input signal. The type of flowmeter pickup / signal is selected with SETUP 61. Note: The selections "active pulse" offer a detection level of 50% of the supply voltage. Read also par. 4.4.3. Flowmeter in

Fluidwell F132-P Manual  (48 pages)

• Identifier: id-2203294
• Brand: Fluidwell
• Device: Controller
• Type: Manual , PDF
• Key Aspects: FAQs on Installation, Best Practices for Troubleshooting
• UPD Date: 22.03.2026
• Source File: 2084338.pdf
• Pages: 48
• Description: Technical guide for the Fluidwell F132-P. This manual elaborates on detailing setup, adjustment procedures, software configuration, troubleshooting tips.

Key Pages and Contents:

• Any responsibility is lapsed if the instructions and procedures as described in this manual

  are not followed. • LIFE SUPPORT APPLICATIONS: The F132-P is not designed for use in life support appliances, devices, or systems where malfunction o

• Note that sometimes the submenu

  name is shown on the upper line of the display. How to enter the setup menu When the setup menu is protected by a password, the F132-P asks for a password to access the setup menu. Action Result Remark 1 Press the PROG/ENTER key, for

• PROTECTIVE EARTH (PE) CONNECTIONS

  Inside the unit, different types of bonding and earthing are used. The common ground is mostly used for termination of the wire shields; the Protective Earth (PE) is used for electrical safety. For externally powered installat

• Active signal - 8.2V - 12V and 24V:

  If a sensor gives an active signal (read chapter 3). The detection levels are 50% of the selected supply voltage; approx. 4V (8-1 DC) or 6V (12 DC) or 12V (24 DC). Active signal selection may well be desired in case of power suppl