Fluke 714 Manuals

® 71X Series Process Calibrators Calibration Manual PN 686540 January 1998 Rev. 8, 3/06 © 1998-2006 Fluke Corporation, All rights reserved. Printed in U.S.A. All product names are trademarks of their respective companies.

Recommended accessories – 712, 714 and 724 Calibrators Specifications – 712 and 714 Calibrators For more information, go to www.fluke.com/tempcal Fluke 712, 714 and 724 Temperature Calibrators Accurate and rugged, temperature calibration tools. Included accessories Each 71X calibrator includes: C81Y Protective Yellow Holster with Flex-Stand™, test leads and alligator clips (excluding model 714), single 9 V alkaline battery and instruction sheet (14 languages). Ordering information Fluke-712 RTD Calibrator Fluke-714 Themocouple Calibrator Fluke-724 Temperature Calibrator (also see page 29) The Fluke 710 Series temperature calibrators deliver out- standing performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibra- tors are compact, lightweight, and easy to carry. And with a push-button interface, similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 710s are easy to use. Each calibrator is EMI tolerant, dust- and splash-resistant, and features a removable battery door for quick battery changes. Fluke 712 RTD Calibrator • Compatible with pulsed current transmitters • Measure temperature from an RTD probe • Simulate RTD output • Operates with seven types of RTD • Measure additional RTDs using Ohms measurement function • Simulate additional RTDs using Ohms source function • °F or °C selectable • Four shrouded banana jacks Fluke 714 Thermocouple Calibrator • Measure temperature from TC probes • Simulate TC output • Operable with nine types of thermocouples • Calibrate linear TC transmitter with mV source function • Selectable °F or °C • Thermocouple mini-jack termination • Available as accessories: Fluke 700TC1 and TC2 Thermocouple Mini-plug Kits Model Function Range Resolution Accuracy Notes Fluke-712 Measure/simulate -200 °C to 800 °C 0.1 °C, 0.1 °F 0.33 °C, 0.6 °F Pt; 100 200 500 1000 RTD (Pt 100-385) (Pt 100-385) (385); Pt 100 (392); Pt 100 (392) JIS; Ni 120 (672) Measure/simulate 15 Ωto 3200 Ω 0.1 Ω 0.1 Ωto 1 Ω Resistance Fluke-714 Measure/simulate -200 °C to 1800 °C, 0.1 °C or °F 0.3 °C + 10 µV 9 TC types; Thermocouple depending (1 °C or °F; BRS) J K T E R S B per NIST on type 175 and ITS-90 (K, -200 °C to L U per DIN 43710 and 1370 °C) PTS-68 Measure/simulate -10 to 75 mV 0.01 mV 0.025 % mV + 1 count General specifications for all Fluke 712 through 718 calibrators Maximum voltage: 30 V Non-operating temperature: -40 °C to 60 °C Operating temperature: -10 °C to 55 °C Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C) Operating altitude: 3,000 m max Shock: 1m drop test Vibration: Random, 2 g, 5-500 Hz Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022:1994 Class B Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz) Size/weight (HxWxD) (712-717 with holster and FlexStand™): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz) Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz) Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz) Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 Battery life: 4 to 20 hours, typical, depending on functions used Warranty: Three-years (one year on pressure pump in Fluke 718) TL75 (712 and 714) C550 (712 and 714) TL220 (712 and 714) C25 (712 and 714) 80PK-24 (714) See page 39 See page 44 See page 39 See page 44 See page 42 TL75 (724) TL220 (724) C100 (724) 80PK-3A (724) 80PK-IR (724) See page 39 See page 39 See page 44 See page 42 See page 42 Fluke 724 Temperature Calibrator • Source/measure TCs, RTDs, volts and ohms • Measure mA while supplying loop power • 25 % and 100 % stepping, auto-step and auto ramp • For specifications, see page 29 Temperature Calibration Data Sheet (Literature code 1560369) See how Fluke can help you calibrate, troubleshoot and verify the most common temperature devices, faster and easier. 26

714 English Instruction Sheet Page 1 ® 714 Thermocouple Calibrator Instruction Sheet Introduction The Fluke 714 Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures in units of °C, °F, or mV, through a thermocouple minijack. Your calibrator is supplied with a Flex-Stand holster, an installed 9 V alkaline battery, and this instruction sheet. Sets of thermocouple miniplugs are available from Fluke. (Accessories Fluke-700TC1 and Fluke-700TC2 TC Miniplug Kits.) If the calibrator is damaged or something is missing, contact the place of purchase immediately. Contact your Fluke distributor for information about accessories. To order replacement parts or spares, see “Replacement Parts.” The following tables list the thermocouple types supported by the calibrator, the standards and scales used for each type, the thermocouple properties, and calibrator resolution. Full calibrator specifications are listed at the end of this instruction sheet. Note Since mV input and output units are available, you can use the calibrator for any thermocouple type by making manual calculations or referring to tables. PN 650306 July 1997 Rev. 1, 10/97 1997 Fluke Corporation. All rights reserved. Printed in U.S.A. All product names are trademarks of their respective companies. 1.800.868.7495 [email protected] Fluke-Direct.ca

714 English Instruction Sheet Page 1 ® 714 Thermocouple Calibrator Instruction Sheet Introduction The Fluke 714 Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures in units of °C, °F, or mV, through a thermocouple minijack. Your calibrator is supplied with a Flex-Stand holster, an installed 9 V alkaline battery, and this instruction sheet. Sets of thermocouple miniplugs are available from Fluke. (Accessories Fluke-700TC1 and Fluke-700TC2 TC Miniplug Kits.) If the calibrator is damaged or something is missing, contact the place of purchase immediately. Contact your Fluke distributor for information about accessories. To order replacement parts or spares, see “Replacement Parts.” The following tables list the thermocouple types supported by the calibrator, the standards and scales used for each type, the thermocouple properties, and calibrator resolution. Full calibrator specifications are listed at the end of this instruction sheet. Note Since mV input and output units are available, you can use the calibrator for any thermocouple type by making manual calculations or referring to tables. PN 650306 July 1997 Rev. 1, 10/97 1997 Fluke Corporation. All rights reserved. Printed in U.S.A. All product names are trademarks of their respective companies. Shop for Fluke products online at: 1.800.561.8187 www.MyFlukeStore.ca

® 714 Thermocouple Calibrator Instruction Sheet Introduction The Fluke 714 Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures in units of °C, °F, or mV, through a thermocouple minijack. Your calibrator is supplied with a Flex-Stand holster, an installed 9 V alkaline battery, and this instruction sheet. Sets of thermocouple miniplugs are available from Fluke. (Accessories Fluke-700TC1 and Fluke-700TC2 TC Miniplug Kits.) If the calibrator is damaged or something is missing, contact the place of purchase immediately. Contact your Fluke distributor for information about accessories. To order replacement parts or spares, see “Replacement Parts.” The following tables list the thermocouple types supported by the calibrator, the standards and scales used for each type, the thermocouple properties, and calibrator resolution. Full calibrator specifications are listed at the end of this instruction sheet. Note Since mV input and output units are available, you can use the calibrator for any thermocouple type by making manual calculations or referring to tables. PN 650306 July 1997 Rev. 1, 10/97 1997 Fluke Corporation. All rights reserved. Printed in U.S.A. All product names are trademarks of their respective companies.

Supplement © 2007-2014 Fluke Corporation.  All rights reserved. Title: 715 Inst.Sht. Supplement Issue: 6 Part Number: 650314 Issue Date: 1/14 Print Date: July 1997 Page Count: 2 Revision/Date: 3, 8/05 This supplement contains information necessary to ensure the accuracy of the document described above. gui s.c

® 71X Series Process Calibrators Calibration Manual PN 686540 January 1998 Rev. 11, 3/12 © 1998-2012 Fluke Corporation, All rights reserved. Printed in U.S.A. Specifications are subject to change without notice. All product names are trademarks of their respective companies. www. .com [email protected] 1.800.561.8187

® 71X Series Process Calibrators Calibration Manual PN 686540 January 1998 Rev. 10, 5/09 © 1998-2009 Fluke Corporation, All rights reserved. Printed in U.S.A. Specifications are subject to change without notice. All product names are trademarks of their respective companies.

71X Series Process Calibrators Calibration Manual January 1998 Rev. 12, 9/19 © 1998-2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies.

® 71X Series Process Calibrators Calibration Manual PN 686540 January 1998 Rev. 11, 3/12 © 1998-2012 Fluke Corporation, All rights reserved. Printed in U.S.A. Specifications are subject to change without notice. All product names are trademarks of their respective companies. 1.888.610.7664 [email protected] Fluke-Direct.com