Freecom USB DAT-40ES Manuals

Freecom USB DAT-40ES Operation & user’s manual (60 pages)

• Identifier: id-306222
• Brand: Freecom
• Device: Storage
• Type: Operation & user’s manual, PDF
• Key Aspects: Advanced Usage Techniques, Regulatory Compliance Information, Common User Mistakes
• UPD Date: 12.07.2026
• Source File: 270026.pdf
• Pages: 60
• Description: Product instruction handbook for the Freecom USB DAT-40ES. This guide presents instructions on maintenance procedures, technical specifications, device calibration.

Key Pages and Contents:

• Table 5 Cleaning cartridge compatibility

  Tape drive model Cleaning cartridge required HP StorageWorks DAT 160 tape drives You must use a DAT 160 cleaning cartridge, part number C8015A All other HP StorageWorks DAT tape drives You must use a standard cleaning cartridge, part number C5709A Do not use

• 5 Verify installation

  Once you have installed the drive hardware, check that drivers have been installed correctly and you have the correct version of backup software, and verify that the tape drive is functioning properly before you store your valuable data. 1. Switch on the drive and the server. 2

• Has the drive been moved recently? Have any cables been disconnected and reconnected? Has the

  environment changed—unusually hot, cold, damp or dry? Has there been dust or dirt near the drive. Have reasonable precautions against static been taken? The problem could lie with the drive: 1. Check the

• Figure 3 Removing cover from typical ProLiant server

  Figure 4 Removing cover from typical AlphaServer 4. Remove the filler panel from a spare 5¼-inch bay of your server, as described in your server’s documentation. Keep any screws for use in “Secure the drive” on page 27. 5. You are now read