Fujitsu Rugged Tablet Case Manuals

Fujitsu Rugged Tablet Case Operation & user’s manual (12 pages)

• Identifier: id-77035
• Brand: Fujitsu
• Device: Fujitsu Rugged Tablet Case Carrying Case
• Type: Operation & user’s manual, PDF
• Key Aspects: Customer Testimonials, Proven Benefits of Use
• UPD Date: 26.08.2026
• Source File: 287040.pdf
• Pages: 12
• Description: Manual for installation and usage of the Fujitsu Rugged Tablet Case. This manual details network setup, safety precautions, installation guides.

Key Pages and Contents:

• Figure 10. Tightening the strap

  Installing the shoulder strap To install the shoulder strap, open the spring-loaded clips on both ends and attach one to each of the D-rings (Figure 11). Figure 11. Installing the shoulder strap …

• Installing the system

  To install your system into the rugged tablet case, perform the following steps: 1. Position the case face down (the same orientation as when you installed the hand strap). 2. Position the system in tablet mode with the display fac- ing down, and hold it by the edge opposite …

• Figure 1. Rugged tablet case - Front

  * Use the pen which came with the case in the pen holder. See note above. The pen which came with the system is too small to fit snugly in the pen slot, so a full-size pen is included with the case. The pen holder on the top front of the case should be used t …

• Installing the pen tether

  To install the pen tether, insert one end into one of the D- rings, then feed it through the loop on the other end. Pull it snug against the D-ring. Feed the loose end of the tether through the hole on the end of the pen, slide the loop over the tip of the pen, then down …