FUTABA MPDX-1 Manuals

• No part of this manual may be reproduced in any form without prior permission. • The contents of this manual are subject to change without prior notice. • This manual has been carefully written. Please write to Futaba if you IHHOWKDWDQ\FRUUHFWLRQVRUFODUL¿FDWLRQVVKRXOGEHPDGH Before using your new MPDX-1, please read this manual thor- oughly and use the system properly and safely. After reading this manual, store it in a safe place. 1M23N16801 Connections and Name of Each Part of the MPDX-1 Multi-Prop Decoder MPDX-1 Thank you for purchasing a MPDX-1 Multi-Prop Decoder. The MPDX-1 connects to the receiver output of a 14MZ or FX-40 System and expands the signal of one channel to 8 channels. Features Ɣ6HUYRRSHUDWLRQRIFKDQQHOVLVSRVVLEOHZLWKFKDQQHO Ɣ/LQHDURSHUDWLRQLVSRVVLEOH Ɣ7KHVHUYRRSHUDWLRQVSHHGRIHDFKFKDQQHOFDQEHVHW Ɣ)DLOVDIHVHWWLQJRIHDFKFKDQQHOLVSRVVLEOH Ɣ7KH70=);FDQPRXQWXSWRPXOWLSURSGHFRGHUV&KDQQHO H[SDQVLRQXSWRFKDQQHOVLVSRVVLEOH Ɣ2SHUDWLRQFRQWUROVHWWLQJGLUHFWLRQRIRSHUDWLRQFKDQJHDQGWUDYHO DGMXVWPHQWDUHSRVVLEOHIRUHDFKPXOWLSURSH[SDQGHGFKDQQHO 70=);WUDQVPLWWHUVLGHVHWWLQJ Applicable systems; 14MZ system/FX-40 system INSTRUCTION MANUAL Input connector Ɣ&RQQHFWVWRWKHPXOWLSURS channel of the receiver. Rotary switch INC/FS push switch DEC/HOLD push switch Servo output connectors (1~8) Ɣ&RQQHFWWKHVHUYRV External battery connector (EXT.BATT) Ɣ&RQQHFWWKHVKRUWLQJSLQVVXSSOLHGZKHQSRZHULV VKDUHGZLWKWKHUHFHLYHUSRZHUVRXUFH Mini screwdriver Connections 1 Connect the input connector to the receiver multi- prop channel. 2 Connect the servos to the output connectors (1~8). 3 Connect a 4.8V battery to the external battery connector (EXT.BATT). Note: However, when sharing the power source with the receiver, connect the shorting pins. ｎCAUTION ｊ When the number of servos is large, we recom- mend the use of a separate power supply. Monitor LED - 1 -