G-Tech FIELD MATE Manuals

G-Tech FIELD MATE User manual and installation manual (26 pages)

• Identifier: id-829637
• Brand: G-Tech
• Device: Controller
• Type: User manual and installation manual, PDF
• Key Aspects: Common Errors and Solutions, Safety Precautions, Limitations of the Device
• UPD Date: 26.04.2026
• Source File: 810125.pdf
• Pages: 26
• Description: User setup guide for the G-Tech FIELD MATE. The guide outlines procedures for operating modes, user settings, component replacement.

Key Pages and Contents:

• Using the "FieldMate Reporter" software.

  Page 21 Use this application to down load Job information from any PRO series Meter. 1: Connect the Meter to the down load cable attached to the office PC. A : The Meter should connect to a DB15 cable B : The DB15 cable connects to a USB serial converter with

• Empty the Spreader using DUMP MODE.

  1. Goto DUMP mode. 2. Quick press the power button to enter DUMP mode. 3. Quick press the 6 button will put the spreader in to EMPTY mode. In this mode the EMPTY label will flash. - Hold down the 5 or 6buttons to make the chain start. - The Monit

• Clearing the Meter.

  *Hold the Reset key down for 5 seconds to delete the current job information. Page 20 Reset all Jobs: 1: Turn FIELD MATE tm Off. 2: Hold down the 6 key, "RESET ALL JOBS" is displayed and a scroll bar counts across at the bottom of the screen. 3: Repeat step 2,

• 5 – 30 Volts

  Max Field Mate Current : 25ma Current Soleniod Current : 1 amp Temperature : -5 to 55 degree/C Input voltages : 0 to 30 Volts Area : 999.99 hect Distance : 999.99 km Speed : 100 km/Hr Wheel Size : 999.9 cm Width : 9999.9 cm Number of m