Game ready GRPro 2.1 Manuals

C-T SPINE USE GUIDE ENGLISH ASSEMBLY The Heat Exchanger (PN 520502-03) fits inside the Sleeve (PN 510502) and comes as part of a pre-assembled Wrap (PN 590502-03). If the Heat Exchanger is removed to launder the Sleeve or for any other reason, please use the following instructions to re-insert the Heat Exchanger into the Sleeve. SIZING SPECIFICATIONS • Size: One Size WARNING It is mandatory to fully read and understand your System’s User Manual before using the device. Failure to follow operating instructions could result in serious injury. IMPORTANT Read complete indications, contraindications, cautions, and warning before using this product. Keep this document for future reference. REMOVAL OF HEAT EXCHANGER 1. Disconnect the Connector Hose from the Wrap 2. Unzip the zipper 3. Gently pull out the Heat Exchanger STORAGE OF YOUR WRAP Hang your Wrap on a wide hanger or lay flat. Do not fold or stack it, as this could kink the fluid chamber and the Wrap will not work properly. 1 Lay the Sleeve with the zipper side down on a flat surface and remove the chest straps (C), then turn the Sleeve over so the zipper is facing up. 2 Lay the Heat Exchanger out flat, separate from the outer sleeve. Insert the Heat Exchanger into the Sleeve by feeding the connector through the opening (F) on the left shoulder. The blue side of the Heat Exchanger should touch the blue side of the Sleeve. 3 Be sure the Heat Exchanger is flat inside the sleeve on the back and shoulder areas. In order for the collar to lay correctly, rotate the shoulder wings back (A), then smooth the heat exchanger inside the collar. Zip the sleeve closed, and flip the Wrap over with the shoulder wings facing forward. The Wrap should resemble a vest with a high collar. Attach the chest straps (C) to complete assembly, orienting the logo on the chest straps as shown. FOR USE WITH GAME READY GRPRO® 2.1 SYSTEM BEFORE INITIAL USE • With the GRPro 2.1 Control Unit off, attach the Connector Hose to the Control Unit and the Wrap • Lay the Wrap open and flat next to the Control Unit (not on the body) • Turn the System on and run for 2 minutes with No Pressure Prime the Wrap using the following steps:

This User’s Manual is also available online in English, French, German, Italian, Japanese, and Spanish at www.gameready.com under Products. Model NuMbers 550550-03, 550550-03-rN, 550550-53 GrPro™ 2.1 CoNtrol uNit user’s Manual53 Game Ready Control Unit User’s Manual PN 703758 Rev D ©2011 CoolSystems, Inc. All rights reserved. Brought to you by CoolSystems, Inc. 1800 Sutter Street, Suite 500 Concord, CA 94520 1.888.GameReady (1.888.426.3732) +1.510.868.2100 www.gameready.com SUPERSEDED

DEUTSCH MODELLE 550550-03, 550550-03-RN, 550550-53 Bedienerhandbuch GRPro ® 2.1-ST E U E RG E RÄT 3 SUPERSEDED

This User’s Manual is also available online in English, French, German, Italian, Japanese, and Spanish at www.gameready.com under Products. Model Numbers 550550-03, 550550-03-RN, 550550-53 GRPro™ 2.1 Control Unit User’s Manual