GESTRA BA 46 Manuals

GESTRA BA 46 Installation instructions and product information (40 pages)

• Identifier: id-1569379
• Brand: GESTRA
• Device: Kitchen Appliances
• Type: Installation instructions and product information, PDF
• Key Aspects: Step-by-Step Setup Guides, Setup Verification Steps
• UPD Date: 18.04.2026
• Source File: 1431895.pdf
• Pages: 40
• Description: User reference manual for the GESTRA BA 46. The manual details calibration steps, product specifications, product safety, shutdown procedures.

Key Pages and Contents:

• ■ Combination spanner A. F. 7 mm, DIN 3113, Form B

  ■ Combination spanner A. F. 10 mm, DIN 3113, Form B ■ Combination spanner A. F. 13 mm, DIN 3113, Form B ■ Combination spanner A. F. 16 mm, DIN 3113, Form B ■ Combination spanner A. F. 17 mm, DIN 3113, Form B ■ Torque spanne

• The continuous blowdown valves BA 46, BA 47, BAE 46... and BAE 47... do not require any special

  ­maintenance. Depending on the quality of the boiler water it might be necessary to service the valve every one or two years. Maintenance 01. Observe the danger note on page 5! 02. Unscrew the hexag

• Continuous blowdown valve REAKTOMAT BA 46, BA 47

  To open or close the continuous blowdown valve BA 46, BA 47 use the control lever and to set the required amount of boiler blowdown use the scale. The required amount of boiler blowdown can be calculated with the aid of a formula or read off on a no

• Dimensions of butt-weld ends (extract)

  Dimensions of socket-weld ends (extract) L DN ASME B16.25, Schedule 40 ASME B36.10 ASME B16.25, Schedule 80 ASME B36.10 [inch] ½ ¾ 1 1¼ 1½ 2 1 1½ 2 [mm] 15 20 25 32 40 50 25 40 50 d2 22 28 34 43 49 61 34 49 61 d1 15.7 20.9 26.6 35.1 40.9 52.5 24.3 38.1

GESTRA BA 46 Original installation instructions (48 pages)

• Identifier: id-1569380
• Brand: GESTRA
• Device: Control Unit
• Type: Original installation instructions, PDF
• Key Aspects: Best Practices for Use, Hardware Setup Instructions
• UPD Date: 16.03.2026
• Source File: 1431894.pdf
• Pages: 48
• Description: User handbook for the GESTRA BA 46. The document provides guidance on safety and operating conditions, product specifications, regulatory notices, troubleshooting tips.

Key Pages and Contents:

• Dimensions and weights

  BA BAE

• Flow diagram for DN 40 and DN 50, capacity range up to 1,340 kg/h

• Flow diagram for DN 15 to DN 32, capacity range up to 1,020 kg/h

• Stuffing box gland

  16 Spring bushing 17 Wiper 18 Guide bushing 19 Anti-wear bushing 20 Stepped bushings 21 Seat bushing No. Designation 22 Sampling valve 23 Locking screw 24 Sealing ring 25 Nozzle needle 26 Packing ring 27 Disc springs 28 Stuffing box screws