Guardall DTX 15 Manuals

Installation Instructions Part No. 320902-0E DTX 15 / 18 3 5 7 1 2 4 8 6 Diagram 1 - Description 1. Coin slot 2. Off the wall tamper (using this mounting hole provides off the wall tamper) 3. Detector mounting holes 4. Cable entry knock-outs 5. Mirror adjustment and fi xing screw 6. Pyro Detector (Do not touch) 7. Microwave range control 8. Cover screw (Loosen only - do not remove) Guardall Limited Lochend Industrial Estate Newbridge, Edinburgh EH28 8PL Technical Hotline: 0131- 333-3802 Website: www.guardall.com Volumetric Plan View 15m / 18m Volumetric Side View 15m / 18m 7.5m/9m 0m 7.5m/9m 2.3m Diagram 3 - Coverage Patterns 0 4m/4.5m 7.5m/9m 12m/13.5m 15m/18m 0 4m/4.5m 7.5m/9m 12m/13.5m 15m/18m Voltage: 12 V (9 V to 16 V dc) Current: Quiescent – 17 mA @ 12V Max – 22 mA @12V (All LED’s ON) Alarm, Aux & Tamper: Normally closed (NC). Rated at 24 V dc, 50mA Test Input: Positive supply to enable LEDs and control Remote Self Test Control Input: Positive supply for system Set. Otherwise Unset Microwave range: 50% to 100% of range via potentiometer 1. Technical Specifi cation See datasheet for full information Use in EN50131 Complaint Systems: DTX 18 meets the requirements of TS50131-2-4:2004, Grade 3, Class II with SW4 and SW9 ON and SW3 OFF. DTX 15 meets the requirements of TS50131-2-4:2004, Grade 2, Class II and is suitable for use on PD6662 Grade 3 systems with SW4 ON and SW3 OFF. Diagram 2 - Terminal block 10 9 8 7 6 5 4 3 2 1 NC Aux Ctrl 12 V Test + - NC Alarm NC Tamper