HERO GLAMOUR PROGRAMMED FI Manuals

HERO GLAMOUR PROGRAMMED FI Manual  (72 pages)

• Identifier: id-2165322
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: Maintenance Schedule, Emergency Procedures
• UPD Date: 01.07.2026
• Source File: 2122312.pdf
• Pages: 72
• Description: Setup and usage guide for the HERO GLAMOUR PROGRAMMED FI. The guide describes usage and troubleshooting, system setup, device safety checks, operating guidelines.

Key Pages and Contents:

• To reduce the possibility of a fire or

  explosion, be careful when working around petrol or batteries. Use only nonflammable solvent, not petrol, to clean parts. Keep cigarettes, sparks and flames away from the battery and all fuel-related parts. Remember that your Authorised Hero MotoCorp Dealer

• Hero MotoCorp Ltd.

  10. In case of tempering of the original wiring circuit in any manner whatsoever. BATTERY WARRANTY PERIOD 3. 3 months idle period is allowed from the date of charging to date of sale on vehicle. Terms and condition of warranty 13. Customers are deemed to have read, understood and

• (2) Caliper (3) Disc (4) Brake pads

  Clean the dirt and mud accumulation between the caliper (2), disc (3) and the brake pads (4) by using a water jet. NOTE : Always contact your Authorised Hero Hero MotoCorp workshop for refilling of master cylinder when necessary. Do not mix DoT 3 and

• 6. Tyres - check condition and pressure

  (page 20-21) 8. Drive chain - check condition and slackness (page 40-42). Adjust and lubricate if necessary. 10. Lamp and horn - check that headlamp, tail/stop lamp, turn signal, lamps and horn function properly. 12. Air suction valve - make sure all tube c

HERO GLAMOUR PROGRAMMED FI Manual  (60 pages)

• Identifier: id-2165323
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: Additional Resources for Users, Summary of Key Features
• UPD Date: 06.03.2026
• Source File: 2122311.pdf
• Pages: 60
• Description: Official operating instructions for the HERO GLAMOUR PROGRAMMED FI. The manual contains instructions for startup procedures, menu navigation, installation procedures, error handling.

Key Pages and Contents:

• Do not shift gears without operating clutch

  and without closing the throttle otherwise this would lead to damage of gears. CAUTION BRAKING î For normal braking, close the throttle and gradually apply both front and rear brakes simultaneously while shifting down gears to suit your road speed. î For

• Hero MotoCorp Ltd.

  LIMITATIONS OF WARRANTY The warranty shall not apply— (16) Any defect(s) developing on account of external factors such as environmental factors; including but not limited to fading/peeling/rusting of paint and/or stripes and/or plated parts, seat leather tearing & cracking, alu

• Instruments and Indicators

  The indicators are in the speedometer panel above the headlamp. The functions are as below. Sl. No. Description Function (1) Mode/reset button Button when pressed switches diplay between tripmeter and odometer. when tripmeter

• Rear brake wear indication

  3 1 (1) Brake panel (3) Arrow (2) Reference mark (4) Brake arm 2 4 ü 40 î Make sure that the cut-out on the adjusting nut is seated on the brake arm pin (4) after the final adjustment has been made. A B (3) Adjusting nut (4) Brake arm pin (A)Decrea

HERO GLAMOUR PROGRAMMED FI Manual  (66 pages)

• Identifier: id-2165324
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: End-of-Life Handling, Sustainability Guidelines, Limitations of the Device
• UPD Date: 25.06.2026
• Source File: 2122310.pdf
• Pages: 66
• Description: Installation guide for the HERO GLAMOUR PROGRAMMED FI. The manual covers procedures for wiring setup, software installation, connectivity setup, hardware instructions.

Key Pages and Contents:

• Check the rear shock absorber by pushing

  hard downwards on rear grip while the vehicle is not parked on stand. The suspension action should be smooth and there should be no oil leakage. (b) Rear shock absorber adjustment B A (1) Pin spanner (2) Rear shock absorber (A) Stiffer (B)

• Visit Authorised Hero MotoCorp workshop

  for inspection, cleaning, lubrication and adjustment of drive chain at every 2000 km. Drive chain slider inspection (Refer to “Maintenance Schedule” on (page 25). Check the drive chain slider (1) for wear, the chain slider must be replaced if it is wo

• Your vehicle is designed to automatically stop

  the engine & fuel pump, if vehicle falls down. Ignition cut off (Bank angle sensor cuts off the ignition). Running in During first 1000 km, do not operate the vehicle at more than 65 km/hr. speed in top gear, 45 km/hr. in third gear, 30 km/hr. in second

• Ÿ If adjustment is necessary, turn the rear

  brake adjusting nut (3). Ÿ Make sure that the cut-out on the adjusting nut is seated on the brake arm pin (4) after the final adjustment has been made. Ÿ Apply the brake several times and check for free wheel rotation when released. NOTE If proper adjus

HERO GLAMOUR PROGRAMMED FI Manual  (78 pages)

• Identifier: id-2165325
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: Installation Overview, Integration with Other Systems, Installation Planning Strategies
• UPD Date: 04.04.2026
• Source File: 2122309.pdf
• Pages: 78
• Description: Official user manual for the HERO GLAMOUR PROGRAMMED FI. It includes troubleshooting procedures and usage recommendations, installation support, hardware instructions, safety protocols.

Key Pages and Contents:

• IMPORTANT SAFETY INFORMATION

  Your vehicle can provide many years of service and pleasure if you take responsibility for your own safety and understand the challenges you can meet on the road. There is much that you can do to protect yourself when you ride. You will find many helpful r

• • Using tyres that are excessively worn or

  improperly inflated can cause a crash in which you can be seriously hurt or killed. • Follow all instructions in this owner's manual regarding tyres inflation and maintenance. WARNING !! Front Rear 80/100-18 47P (Tubeless tyre) 100/80-18 53P (Tubeles

• (1) Air pressure gauge

  Inspection Whenever you check the tyre pressure, you should also examine tyre treads & side walls for wear, damage & foreign objects. Look for: • Bumps or bulges in the side of the tyre or the tread. Replace the tyre if you find any bumps or bulges. • Cuts, splits or c

• Hero MotoCorp Ltd.

  Scope of warranty Hero MotoCorp Ltd. (hereinafter called ‘Hero MotoCorp’) warrants its GLAMOUR PROGRAMMED FI vehicles, assembled/manufactured in its Plants and sold through its channel partners, to be free from any defect - both in material and workmanship, under norm