HERO IGNITOR Manuals

HERO IGNITOR Manual  (97 pages)

• Identifier: id-2165311
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: Recommendations for Effective Usage, Checklists for New Users, Latest Software Update Notifications
• UPD Date: 12.06.2026
• Source File: 2122323.pdf
• Pages: 97
• Description: Manual for installation and usage of the HERO IGNITOR. It contains information on diagnostic information, safety features, operating instructions, device features.

Key Pages and Contents:

• (1) Shock absorber adjustment tool

  (A) Stiffer (B) Softer B A 1 1. Raise the front wheel off the ground. 2. Remove the speedometer cable (1) by pressing the tab (2) & then pull out the cable. Drum Type In direction A stiffer. In direction B softer. NOTE Always adjust both the rear shock absorber

• Press the electric

  starter switch keeping the throttle closed. NOTE : To start the engine in any gear position, press the clutch lever and press the starter switch. 33 Push the choke knob inwards as indicated, after warming up the engine for few seconds. Continue warming of the engine until it runs

• Fuse Type : Blade fuse

  Refer to the safety precautions on (page 38). Spare fuse : (3) 15A, 10A Fuse Box (1) Location : On battery band. In circuit fuse : (2) 15A, 10A FUSE REPLACEMENT Fuse Type : Blade fuse Spare fuse : (6) 20A Start Mag. Switch (4) In circuit fuse : (5) 20A Location : Below star

HERO IGNITOR Manual  (65 pages)

• Identifier: id-2165312
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: Illustrations and Diagrams Demonstrating Processes, Latest Software Update Notifications
• UPD Date: 26.06.2026
• Source File: 2122322.pdf
• Pages: 65
• Description: User and installation guide for the HERO IGNITOR. This reference manual outlines setup instructions, technical assistance, power requirements, cleaning instructions.

Key Pages and Contents:

• î parked on stand. The motorcycle is action should

  be smooth and there should be no oil leakage. Front Rear Always adjust both the rear shock absorber to the same position. Use the rear shock absorber adjustment tool (pin spanner) (1) available in the tool kit. NOTE Rear shock absorber adjustmen

• î Clean the dirt and mud accumulation

  between the brake pads (3), caliper (4) and the disc (5) by using a water jet. î Always contact your Authorised Hero MotoCorp workshop for refilling of master cylinder when necessary. Do not mix DoT 3 and DoT 4 brake fluids. Always apply front and rear br

• î Fuel tank

  15 î Document compartment/Helmet holder 18 î Ignition switch 10 î LCD Panel 11 ENGINE OIL/ENGINE OIL TOP UP PROCESS 19 RIDING/BRAKING 25 MOTORCYCLE VIEWS 6 PARTS FUNCTION 9 î Steering lock/Fuel valve 14 î Air cleaner drain tube 18 PARK

• Brake Lamp Switch

  I, A I, A I, A I, A I, A I, A Headlamp Focus I, A I, A I, A I, A I, A I, A Clutch I, A I, A I, A I, A I, A I, A Side Stand/Main Stand L L L L L L Fasteners*** I I I I I I Wheels/Tyres I I I I I I Steering Head Bearing I I, A I I, L, A I, A I I, L, A I, A I, E I I, E I I, E I 300