HERO PLEASURE+ PROGRAMMED FI Manuals

HERO PLEASURE+ PROGRAMMED FI Manual  (79 pages)

• Identifier: id-2165294
• Brand: HERO
• Device: Motorcycle
• Type: Manual , PDF
• Key Aspects: Testing and Quality Assurance Processes, Best Practices for Troubleshooting
• UPD Date: 01.04.2026
• Source File: 2122340.pdf
• Pages: 79
• Description: Operation instructions for the HERO PLEASURE+ PROGRAMMED FI. The document provides guidance on safety and operating modes, connectivity setup, product safety.

Key Pages and Contents:

• • BS-VI grade fuel : Always use BS-VI grade fuel to adhere BS-VI norms.

  • Regular servicing: vehicle service station Get your serviced at an Authorised , as per the service schedule, for an optimum performance and keep the emission level under check. • Genuine spares: Hero MotoCorp Always

• If proper adjustment cannot be obtained by

  this method, visit your Authorised Hero MotoCorp workshop. • Check brake cable for kinks or signs of wear that could cause sticking or failure. • Make sure the brake arm spring and fasteners are in good condition. (3) Adjusting nut

• • Remove turn signal bulb holder with bulb by

  turning anticlockwise. • Install the tail/stop lamp cover and connect the seat catch cable. • Install the rear grip . (page 31) • Install the body covers . (page 31) (d) Rear turn signal bulb • Remove the rear center cover (page 30). • Rem

• • Disconnect the left turn signal lamp

  connector (3) and right turn signal lamp connector (4). • Remove screws (2) from the inner side. (1) Screws 1 2 (2) Screws Installation • Remove the bolts (1). (d) Rear grip • Open the seat (page 24). • Remove the rear grip (2). • Remove the fuel