Hi-Tech 22-229 Manuals

Hi-Tech 22-229 Instruction manual (16 pages)

• Identifier: id-1274838
• Brand: Hi-Tech
• Device: Saw
• Type: Instruction manual, PDF
• Key Aspects: Recovery Procedures After Failures, Accessibility Features Overview
• UPD Date: 01.07.2026
• Source File: 1263703.pdf
• Pages: 16
• Description: Technical operation manual for the Hi-Tech 22-229. It describes maintenance tasks and operating guidelines, connectivity options, safety information, safety protocols.

Key Pages and Contents:

• Before you make the first cut, line up your

  rock or glass properly with the saw blade. Lightly slide the material into the saw blade until a groove forms, then push the material firmly through the saw blade. Do not attempt to cut curves with the trim saw, it is designed to cut strai

• IMPORTANT! READ FIRST

  For your own safety be sure to read, understand and follow all warnings, safety rules and instructions in this instruction manual before using this machine. Failure to do so can result in serious personal injury. This instruction manual is intended for the

• Put on safety goggles (not included), then

  turn on the machine by turning the power knob clockwise. Adjust the speed of your saw blade using the speed chart on page 6 as a guide. Never exceed the saw blade’s maximum rpm. 8 There should be a fine mist coming from y

• SAW BLADE ADJUSTMENTS

  NEED A REPLACEMENT SET SCREW? The two set screws located in the saw arbor are available at your local hardware store. The size of the set screws are 18-8 stainless steel, cup point, 10-32 thread, 3/16" long. BLADE POSITIONING & CLEARANCE ADJUSTMENTS Follow these four steps t