Hotpoint RFA60 Manuals

FRIDGE FREEZER - MODELS RFA80, RFA70,RFA60,RFS60 INSTRUCTIONS FOR INSTALLATION & USE GETTING STARTED: To ensure that your fridge freezer runs reliably and efficiently follow these steps. SAFETY & INSTALLATION CONTROLS USEFUL ADVICE CLEANING & MAINTENANCE SERVICE & GUARANTEE TROUBLESHOOTING Choose a location for your fridge freezer, away from any heat sources and allow adequate ventilation - 100mm (4 inch) gap above. Level the fridge freezer by adjusting the front feet. This will stop rocking or vibration and keep the door aligned. Before plugging in and switching on, leave the fridge freezer in its final location for at least 15 minutes to allow it to settle. If you are freezing fresh food, turn on fast freeze by pressing the switch 24 hours before placing the food inside. Place the fresh food inside. Move the fridge freezer into position, using the sides of the cabinet. Take care to avoid damaging the refrigerant circuit pipe work on the rear. Plug in and switch on. Allow the fridge freezer to cool before placing food inside. The high temperature light will stay on until the fridge freezer has cooled down. All food in the fridge freezer should be covered. STEP 1 STEP 2 After the front feet have been adjusted and the fridge freezer is level fit the left and right hand bottom hinge covers supplied. Align with the cover plate slots and push into position. STEP 4 STEP 3 STEP 5 STEP 6 STEP 7 Your fridge freezer is now working. If after 24 hours your fridge freezer is not operating as you want, refer to the Troubleshooting section. STEP 8 Read the rest of these instructions to get the best from your appliance and remember to fill in your guarantee registration. Keep this Book in a safe place for quick reference. NB.The spanner is for illustration only and is not supplied with the fridge freezer. Remember to turn fast freeze off after 24 hours, however if you forget to do so it will automatically cancel after 48 hours.